lts.conf

Langue: en

Version: 2008\-11\-18 (ubuntu - 24/10/10)

Section: 5 (Format de fichier)

NAME

lts.conf - Main configuration file for LTSP

SYNOPSIS

Any line beginning with a '#' is considered a comment. Options are of the format:

 VARIABLE=value
 

DESCRIPTION

This file gets parsed when LTSP client starts up. The section defined by [default] gets applied to all clients, unless there is a specification for a particular client that overrides it. The per-client specs are prefixed by [<mac address>]

You may also name an arbitrary section with a name, with settings underneath that section. You may then inherit that section with the LIKE variable. The Example section has an illustration of this.

boolean values are specified by 'Y,y,True,true' for true and 'N,n,False,false' for false

LTS.CONF - GENERAL PARAMETERS

CONFIGURE_FSTAB

boolean, default True
/etc/fstab is generated by boot scripts

CRONTAB_01..CRONTAB_10

string, default unset
A crontab line to add for a thin client.

DNS_SERVER

string, default unset
A valid IP for domain name server Used to build the client's resolv.conf file. Not needed by default.

SEARCH_DOMAIN

string, default unset
sets a valid search domain in the clients's resolv.conf file. Used to build the resolv.conf file. Not needed by default.
Needed if DNS_SERVER is set

LOCAL_APPS

boolean default False
Whether to run apps locally on the client or not

LOCAL_APPS_EXTRAMOUNTS

string, default unset
This parameter enables extra mount points to be mounted on the thin client with sshfs. This require a commas separated list of directory.

LOCALDEV

boolean, default True
This parameter enables local devices support, like CD's and USB sticks. Users plugging them in should see them on the desktop, after they've been allowed to access the FUSE subsystem on the server. Check your distibutions docs to see how this is done on your distribution.

LOCALDEV_DENY_CD

boolean, default False
This parameter disables local device support for CD and DVD-rom devices.

LOCALDEV_DENY_FLOPPY

boolean, default False
This parameter disables local device support for floppy devices.

LOCALDEV_DENY_INTERNAL_DISKS

boolean, default True
This parameter disables local device support for internal ATA and SCSI hard disk devices.

LOCALDEV_DENY_USB

boolean, default False
This parameter disables local device support for USB devices.

LOCALDEV_DENY

string, default unset
This parameter disables local device support for devices matching certain patterns. Values are specified as a comma-separated list of sysfs attributes, which can be obtained by using udevadm info (or udevinfo). for example:
                         udevadm info -q env -n /dev/hda
                         ID_TYPE=disk
                         ID_BUS=ata
                         
 

should return a list of the attributes relevent to /dev/hda. to exclude this disk and disks like it using LOCALDEV_DENY: LOCALDEV_DENY="ID_BUS:ata+ID_TYPE:disk" would match devices that were on the ata bus that were disks.

NBD_SWAP

boolean, default False
Set this to True if you want to turn on NBD swap.
If you enable this, you'll need to add the line:
                         nbdswapd: ALL: keepalive
                     
 

to your /etc/hosts.allow file.

NBD_SWAP_PORT

integer, default 9572
The port on which NBD swapping will occur. This is set to 9572 by default.

NBD_SWAP_SERVER

IP address, default SERVER
The NBD swap server can exist on any server on the network that is capable of handling it. You can specify the IP address of that server. The default is whatever the value of SERVER set to.

SERVER

IP address, default unset
This is the server that is used for the XDM_SERVER, TELNET_HOST, XFS_SERVER and SYSLOG_HOST, if any of those are not specified explicitly. If you have one machine that is acting as the server for everything, then you can just specify the address here and omit the other server parameters. If this value is not set, it will be auto detected as the machine that the thin client booted from.

SYSLOG_HOST

IP address, default unset
If you want to send logging messages to a machine other than the default server, then you can specify the machine here. If this parameter is NOT specified, then it will use the SERVER parameter described above.

USE_LOCAL_SWAP

boolean, default False
If you have a hard drive installed in the thin client, with a valid swap partition on it, this parameter will allow the thin client to swap to the local hard drive.

TIMEZONE

string, default unset
The timezone code for the thin client to use.

TIMESERVER

IP address, default unset
The address of an NTP time server that the thin client can set it's time from. If unset, the thin client just uses the BIOS time.

SHUTDOWN_TIME

string, format hh:mm:ss in 24 hour format, default unset
Time at which thin client will automatically shut down.

LTS.CONF - SCRIPTS AND MODULES

MODULE_01...MODULE_10

string, default unset
Up to 10 kernel modules can be loaded by using these configuration entries. The entire command line that you would use when running insmod can be specified here. For example:
 MODULE_01 = uart401.o
 MODULE_02 = "sb.o io=0x220 irq=5 dma=1"
 MODULE_03 = opl3.o
                     
 

If the value of this parameter is an absolute path name, then insmod will be used to load the module. Otherwise, modprobe will be used.

In normal circumstances, you shouldn't need to specify anything here, as most hardware will be auto-detected.

RCFILE_01...RCFILE_10

A custom rc file, default unset
Additional RC scripts can be executed by the ltsp-client-setup script. Just put the script in the /opt/ltsp/i386/etc/init.d directory, and specify the name of the script in one of these entries. Note that you must specify a full path, relative to the chroot. So, for example, if you have an RC file called /opt/ltsp/i386/etc/init.d/myrcfile, you'd specify:
 RCFILE_01=/etc/init.d/myrcfile
                     
 

In your lts.conf file.

LTS.CONF - PRINTER PARAMETERS

PRINTER_0_DEVICE

string, default unset
The device name of the printer. Valid device names such as /dev/lp0, or /dev/usblp0 are allowed.

PRINTER_0_PORT

integer, default 9100
The TCP/IP Port number to use for the print server.

PRINTER_0_TYPE

string, default unset
Can either be set to P (for parallel), U (for USB) or S (for serial). Autodetected in most cases (except for serial).

PRINTER_0_WRITE_ONLY

boolean, default False
Some parallel printers may need this set in order for the thin client to communicate to them properly. If you have problems with a parallel printer only printing part of the print job, try setting this to True.

PRINTER_0_SPEED

integer, default 9600
Should be set to the baud rate of the printer (serial printers only).

PRINTER_0_FLOWCTRL

string, default unset
Should be set to the flow control desired for the printer (serial printers only).

PRINTER_0_PARITY

boolean, default False
Specifies whether parity should be enabled for the printer (serial printers only).

PRINTER_0_DATABITS

integer, default 8
Specifies how many data bits for the printer (serial printers only).

PRINTER_0_OPTIONS

string, default unset
Specifies specific options for the printer (serial printers only).

LDM_PRINTER_LIST

string, default unset
Comma separated list of printers that will be displayed for that thin client (requires patched cups, included in Debian and Ubuntu).

LDM_PRINTER_DEFAULT

string, default unset
Default printer for the thin client.

SCANNER

boolean, default unset
This parameter enables scanners for the thin client.

LTS.CONF - KEYBOARD PARAMETERS

CONSOLE_KEYMAP

A valid console keymap, default en
Allows you to specify a valid console keymap for TELNET_HOST sessions.

XKBLAYOUT

A valid xkb layout, default unset
Consult the X.org documentation for valid settings.

XKBMODEL

A valid xkb model, default unset
Consult the X.org documentation for valid settings.

XKBVARIANT

A valid xkb variant, default unset
Consult the X.org documentation for valid settings.

XKBRULES

A valid xkb rules specifier, default unset
Consult the X.org documentation for valid settings.

XKBOPTIONS

A valid xkb options specifier, default unset
Consult the X.org documentation for valid settings.

LTS.CONF TOUCHSCREEN PARAMETERS

USE_TOUCH

Enable touchscreen
default <unset>, Enable touchscreen
X_TOUCH_DEVICE Path to device /dev/ttyS0 set device for touchscreen
X_TOUCH_DRIVER Touchscreen driver elographics set driver for touchscreen
X_TOUCH_MAXX integer 3588 Xmax
X_TOUCH_MAXY integer 3526 Ymax
X_TOUCH_MINX integer 433 Xmin
X_TOUCH_MINY integer 569 Ymin
X_TOUCH_UNDELAY integer 10 Untouch delay
X_TOUCH_RTPDELAY integer 10 Repeat touch delay

SOUND AND VOLUME CONTROL PARAMETERS

These parameters allow you to control the volume on the thin client.

SOUND

boolean, default True
This parameter enables sound for the thin client.

SOUND_DAEMON

string, default pulse
This parameter sets which sound daemon to use on the thin client. Values are esd, nasd, and pulse (default).

VOLUME

integer, default 90
This represents an integer percentage of the volume, ranging from 0 to 100%.

HEADPHONE_VOLUME

integer, default unset
This represents an integer percentage of the headphone volume, ranging from 0 to 100%.

PCM_VOLUME

integer, default unset
This represents an integer percentage of the PCM volume, ranging from 0 to 100%.

CD_VOLUME

integer, default unset
This represents an integer percentage of the CD input volume, ranging from 0 to 100%.

FRONT_VOLUME

integer, default unset
This represents an integer percentage of the front speaker volume, ranging from 0 to 100%.

FRONT_VOLUME

integer, default unset
This represents an integer percentage of the front speaker volume, ranging from 0 to 100%.

MIC_VOLUME

integer, default unset
This represents an integer percentage of the microphone input volume, ranging from 0 to 100%.

LTS.CONF - XORG PARAMETERS

These parameters affect how Xorg behaves.

USE_XFS

boolean, default False
Instructs the thin client to look at the XFS_SERVER option, and use XFS for serving fonts.

XFS_SERVER

IP address, default unset
If you are using an X Font Server to serve fonts, then you can use this entry to specify the IP address of the host that is acting as the font server. If this is not specified, it will use the default server, which is specified with the SERVER entry described above.

CONFIGURE_X

If you want to be able to configure the individual settings of the X configuration file, without having the X automatically configure the graphics card for you, you must enable this option. By default this option is turned off. To turn it on do:
 CONFIGURE_X = True
 

. You don't need this option just for keyboard and mouse settings. It corresponds to the graphic card and monitor options only.

X_CONF

string, default unset
If you want to create your own complete X.org config file, you can do so and place it in the /opt/ltsp/<arch>/etc/X11 directory. Then, whatever you decide to call it needs to be entered as a value for this configuration variable. For example: X_CONF = /etc/X11/my-custom-xorg.conf Note that for the thin client, you reference it from /etc/X11.

X_RAMPERC

default '100', Percentage of RAM for X server
Some programs allocate a large amount of ram in the X.org server running on your thin client. Programs like Firefox and Evince can use up so much ram, that they eventually exhaust all your physical ram, and NBD swap, causing your thin client to crash. If you find your clients being booted back to a login prompt, or freezing up when viewing certain PDF's or web pages, this may be the problem.
The X_RAMPERC variable stands for X RAM PERCent, and is a number between 0 and 100 that specifies how much of the free space on your thin client X.org is allowed to consume. You'll generally want to set it at something lower than 100 percent, if you're having problems. Experimentation has shown a value between 80 and 90 will usually keep the terminal alive. What will then happen is the program consuming the memory will die, as opposed to the thin client itself. If you're having unexplained terminal problems, specifying:
X_RAMPERC = 80
in your lts.conf file may improve things.

X_VIRTUAL

string, default unset
If you want to have a virtual screen which is larger than the physical screen on your thin client, you would configure that by providing a string of the form "width height" in this parameter, similar to the xorg.conf format.

XDM_SERVER

IP address, default unset
If you're using the older startx screen script, and need to specify a different XDMCP server, then you can specify the server here. If this parameter is NOT specified, then it will use the SERVER parameter described above.

XSERVER

You can use this parameter to override which X server the thin client will run. For PCI and AGP video cards, this parameter should not be required. The thin client should normally be able to auto-detect the card.
If, for some reason you do need to manually set it, here are some valid values:
ark, ati, atimisc, chips, cirrus_alpine cirrus, cirrus_laguna, cyrix, dummy, fbdev fglrx, glint, i128, i740, i810, imstt, mga, neomagic, newport, nsc, nv, r128, radeon, rendition, riva128, s3, s3virge, savage, siliconmotion, sis, sisusb, tdfx, tga, trident, tseng, v4l, vesa, vga, via, vmware, voodoo

X_MOUSE_DEVICE

string, default unset
This is the device node that the mouse is connected to. If it is a serial mouse, this would be a serial port, such as /dev/ttyS0 or /dev/ttyS1. This is not needed for PS/2 or USB mice, as they are auto-detected.

X_MOUSE_PROTOCOL

Should be auto-detected. However, valid entries include:
sunkbd, lkkbd, vsxxxaa, spaceorb, spaceball, magellan, warrior, stinger, mousesystems, sunmouse, microsoft, mshack, mouseman, intellimouse, mmwheel, iforce, h3600ts, stowawaykbd, ps2serkbd, twiddler, twiddlerjoy

X_MOUSE_EMULATE3BTN

boolean, default unset
Normally unset, may need to be set to Y for certain 2 button mice.

X_NUMLOCK

boolean, default False
If this variable is set to True, then the numlock key will be defaulted to on when the terminal boots. Note that the numlockx command must be installed in the chroot for this to work.

X_COLOR_DEPTH

Integer: 2, 4, 8, 16, 24, 32 default 24
This is the number of bits to use for the colour depth. Possible values are 8, 16, 24 and 32. 8 bits will give 256 colours, 16 will give 65536 colours, 24 will give 16 million colours and 32 bits will give 4.2 billion colours! Not all X servers support all of these values. The default value for this is 24.

X_HORZSYNC

min-max values
This sets the X.org HorizSync configuration parameter. This should be auto-detected for your monitor, however, if you want to force a lower resolution, use this parameter to do so.

X_VERTREFRESH

min-max values
This sets the X.org VertRefresh configuration parameter. This should be auto-detected for your monitor. If you need to force a lower resolution, use this parameter to do so.

X_VIDEO_RAM

string, default unset
This sets the X.org VideoRam configuration parameter. The setting is in kilobytes. This should be auto-detected for your monitor. If you need to force a different video ram setting, use this parameter to do so.

X_OPTION_01...X_OPTION_12

A valid Device option
This allows you to specify Option settings in the xorg.conf file, to add options to the video driver. A common use for this will be to test turning off acceleration in your driver, if you're having trouble. An example usage would be:
 X_OPTION_01 = "\"NoAccel\"" X_OPTION_02 = "\"AnotherOption\" \"True\""
                     
 

You probably won't need these except in special circumstances.

X_MONITOR_OPTION_01...X_MONITOR_OPTION_10

string, default unset
A valid Monitor option, that would normally be used in an xorg.conf file.

X_MODE_0, X_MODE_1, and X_MODE_2

string, default unset
These set the X.org ModeLine configuration. For example, if your thin client comes up in a higher resolution than what you want, say, 1280x1024, specifying:
 X_MODE_0 = 1024x768
                     
 

should get your desired resolution on startup.

For drivers that support XRANDR, the XRANDR_MODE_* variabled are preferred. See the XRANDR section.

X_BLANKING

A positive integer
When set, X_BLANKING will cause DPMS standby to activate after the number of seconds provided. If the monitor does not support DPMS, then the blanking screensaver will activate. If X_BLANKING is set to 0, the monitor will remain on indefinitely. NOTE: This does not apply to the xdmcp or startx screen script. Also, server-side Xclients such as power managers and screensavers may override this setting.

LTS.CONF OPTIONS - XRANDR OPTIONS

XRANDR_DISABLE

boolean, default False
Disables XRANDR output handling so that the older X_MODE_0 way of setting resolution works. This is useful on older Xorg drivers that don't support XRANDR.

XRANDR_OUTPUT_0 ... XRANDR_OUTPUT_8

string, default unset
Define xrandr output - can also be used for multihead positioning

XRANDR_MODE_0 ... XRANDR_MODE_8

string, default unset
Valid video mode resolution. Sets mode for corresponding output.

XRANDR_NEWMODE_0 ... XRANDR_NEWMODE_8

string, default unset
Specifies a valid modeline for a corresponding output.

XRANDR_RATE_0 ... XRANDR_RATE_8

string, default unset
Sets refresh rate for the corresponding output.

XRANDR_DPI_0 ... XRANDR_DPI_8

string, default unset
Sets the DPI for the corresponding output.

XRANDR_ROTATE_0 ... XRANDR_ROTATE_8

string, default unset
Sets the rotation for the corresponding output.

XRANDR_REFLECT_0 ... XRANDR_REFLECT_8

string, default unset
Sets the reflection for the corresponding output.

XRANDR_SIZE_0 ... XRANDR_SIZE_8

string, default unset
Sets the resolution for the corresponding output (for xrandr <1.2).

XRANDR_ORIENTATION_0 ... XRANDR_ORIENTATION_8

string, default unset
Sets the orientation for the corresponding output (for xrandr <1.2).

LTS.CONF OPTIONS - SCREEN SCRIPTS

SCREEN_01...SCREEN_12

string, default ldm
Up to 12 screen scripts can be specified for a thin client. This will give you up to 12 sessions on the thin client, each accessible by pressing the Ctrl-Alt-F1 through Ctrl-Alt-F12 keys.
Currently, possible values include: rdesktop, xdmcp, shell, ldm, startx (depreciated), and telnet
Look in the $CHROOT/usr/share/ltsp/screen.d directory for more scripts, or write your own, and put them there.

TELNET_HOST

IP address, default unset
If the thin client is setup to have a character based interface, then the value of this parameter will be used as the host to telnet into. If this value is NOT set, then it will use the value of SERVER above.

LTS.CONF OPTIONS - LDM OPTIONS

LDM_AUTOLOGIN

boolean, default False
This option allows the thin client to login automatically without the need for a username and password. To set it set
 LDM_AUTOLOGIN = True
 

for the corresponding thin client. This will attempt to log in the thin client with username = hostname and password = hostname. You can also set a user and password with LDM_USERNAME and LDM_PASSWORD variables.

LDM_DEBUG

boolean, default unset
Turns on ldm debugging on the thin client. Log is written to /var/log/ldm.log on the thin client itself.

LDM_DIRECTX

boolean, default False
This is arguably the most important LDM option, as it allows you to turn off the encrypted X tunnel via SSH, and instead run a less secure, but much faster unencrypted tunnel. Users who have slower thin clients will want to set this to True. It is set to True by default in Fedora.

LDM_GUESTLOGIN

boolean, default False
This option places a GUEST LOGIN button underneath the entry field for username and password. To set it set
 LDM_GUESTLOGIN = True
 

for the corresponding thin client. You can also set a user and password with

 LDM_USERNAME = John
 

and

 LDM_PASSWORD = secret
 

, although not setting these will default to the hostname of the thin client.

LDM_ALLOW_USER

string
This option allows you to give access to certain thin clients based on the username set in /etc/passwd. For example, thin client A should only be used by Jane, Bob, and Fred, while thin client B is to be used by Harry only. By adding these options to the corresponding mac addresses you allow or deny access to the thin clients in question. Example:
 [thin:client:A:mac:address]
 LDM_ALLOW_USER = Jane,Bob,Fred
 [thin:client:B:mac:adddress]
 LDM_ALLOW_USER = Harry
                    
 

LDM_LOGIN_TIMEOUT

integer
This lets LDM automatically login after the set amount of time in seconds. If you specify this option, then do not specify LDM_AUTOLOGIN. Use it in this format:
 [thin:client:mac:address]
 LDM_LOGIN_TIMEOUT = 25
                     
 

LDM_USERNAME

string, default unset
This is the username that LDM will use for autologin.

LDM_PASSWORD

string, default unset
This is the password that LDM will use for autologin.

LDM_SYSLOG

boolean, default False
Normally, LDM logs to a simple file on the thin client, namely /var/log/ldm.log. This has the advantage of being fast, but the disadvantage of being hard to read for the administrator in the event of a problem, as the administrator must either spawn a shell screen session, or enable root login in tty1. By setting this option to "True", you can log up to the server if you've enabled your server's syslog for remote logging.

LDM_LANGUAGE

string, default unset
This allows the system administrator to override the default locale settings on the server by setting the environment variables LANG, LANGUAGE and LC_ALL at login.
Use the LANG variable to set the default locale for LDM's user interface.

LDM_SSHOPTIONS

string
Allows you to specify custom options to the ssh sessions started between LDM and the server.

NETWORK_COMPRESSION

boolean, default False
Enables compression of the SSH traffic over the network. Note that while this will reduce your network traffic, it will increase your cpu load.

SSH_OVERRIDE_PORT

integer, default unset
If you run your ssh server different from the defult, you may set the port the thin client will use with this parameter.

SSH_FOLLOW_SYMLINKS

boolean, default True
Causes sshfs mounted filesystems for local applications to follow symlinks. Should not need to be modified under normal circumstances.

LDM_SESSION

string, default unset
Used to chose the default session on the server.

LDM_XSESSION

string, default Xsession
Allows you to specify custom script on the server for LDM to run, rather than the server's standard script for starting an X session (usually Xsession).

LOCAL APPLICATIONS

LOCAL_APPS

boolean, default True
Enables support for running local apps on the thin client.

LOCAL_APPS_MENU

boolean, default False
Enables overriding of menu items from remote (server) applications. If this is set to True, local applications in the users menu will be used instead of the applications on the server.

LOCAL_APPS_MENU_ITEMS

string, default unset
This item should contain a comma separated list of application names as they appear on their .desktop files.

LOCAL_APPS_WHITELIST

string, default unset
Used to allow only specified space-separated commands to be run as local apps, allow all is default if unset. Full-paths are required for each command. No spaces in the names are allowed.

SAMPLES

K12LTSP

 # Global defaults for all clients
 # if you refer to the local server, just use the
 # "server" keyword as value
 # see lts_parameters.txt for valid values
 ################
 [default]
     #X_COLOR_DEPTH=16
     LOCALDEV=True
     SOUND=True
     NBD_SWAP=True
     SYSLOG_HOST=server
     #XKBLAYOUT=de
     SCREEN_02=shell
     SCREEN_03=shell
     SCREEN_04=shell
     SCREEN_05=shell
     SCREEN_06=shell
     SCREEN_07=ldm
     # LDM_DIRECTX=True allows greater scalability and performance
     # Turn this off if you want greater security instead.
     LDM_DIRECTX=True
     # LDM_SYSLOG=True writes to server's syslog
     LDM_SYSLOG=True
 
 
 ################
 # A setting stanza for an old machine
 ################
 [oldmachine]
     X_COLOR_DEPTH=8
     X_MODE_0=800x600
 
 ################
 # Example of the LIKE variable
 ################
 [01:23:DE:AD:BE:EF]
     LIKE=oldmachine
     SCREEN_02=shell
 
 ################
 #[MAC ADDRESS]: Per thin client settings
 ################
 [00:11:25:84:CE:BA]
     XSERVER = vesa
     X_MOUSE_DEVICE=/dev/ttyS0
     X_MOUSE_PROTOCOL=intellimouse
 
 ###############
 # A Thin Client Print server
 # (switch off X by pointing tty7 to shell,
 # to save ressources)
 ###############
 [00:11:25:93:CF:00]
     PRINTER_0_DEVICE=/dev/usblp0
     SCREEN_07=shell
 
 ###############
 # A workstation that executes a specific
 # command after login
 ###############
 [00:11:25:93:CF:02]
     LDM_SESSION=/usr/bin/myloginscript
                 
 

NOTES

Notes about lts.conf that don't fit anywhere else go here...

SEE ALSO

Other manpage references go here...