Linux Certif

Toute la documentation sur la certification Linux LPI

router.db

NAME

router.db - rancid group configuration file

DESCRIPTION

router.db contains information for devices which are members of a rancid group. control_rancid(1) reads this file to compile a list of devices which it should collect.

SYNTAX

One device is listed per-line, where the syntax is:

 <device_name>:<device_type>:<state>[:comments]
 

For example:

 scooby.shrubbery.net:cisco:up
 

The fields are as follows:

<device_name>

The name of the device, which must resolve via gethostbyname, used as the argument to telnet(1), rsh(1), or ssh(1), to connect to the device. Once converted to lower-case, this also becomes the name of the file used to store the configuration under $BASEDIR/<group>/configs.

Experience has shown that using the device's FQDN (Fully Qualified Domain Name) works best, as in the example above.

<device_type>

The type of device from the set:

alteon An Alteon WebOS switches.

avocent An Avocent Cyclades console server.

baynet A Bay Networks router.

bigip A F5 BigIP switch.

cat5 A Cisco catalyst series 5000 and 4000 switches (i.e.: running the catalyst OS, not IOS).

cisco A Cisco router, PIX, or switch such as the 3500XL or 6000 running IOS (or IOS-like) OS.

css A Cisco content services switch.

enterasys An enterasys NAS. This is currently an alias for the riverstone device type.

erx A Juniper E-series edge router.

extreme An Extreme switch.

ezt3 An ADC-Kentrox EZ-T3 mux.

force10 A Force10 router.

fortigate A Fortinet firewall.

foundry A Foundry router, switch, or router-switch. This includes HP Procurve switches that are OEMs of Foundry products, such as the HP9304M.

hitachi A Hitachi routers.

hp A HP Procurve switch such as the 2524 or 4108 procurve switches. Also see the foundry type.

juniper A Juniper router.

mrtd

A host running the (merit) MRTd daemon.

netscalar A Netscalar load balancer.

netscreen A Netscreen firewall.

procket A Procket router.

redback A Redback router, NAS, etc.

riverhead A Cisco Anomoly Guard Module (aka Riverhead). We suspect that at some point the UI will become more cisco-like and it can be merged with the IOS rancid module.

riverstone A Riverstone NAS or Cabletron (starting with version ~9.0.3) router.

smc A SMC switch (some Dell OEMs).

tnt A Lucent TNT.

zebra Zebra routing software.

<state>

The state is either "up", or some other arbitrary value, e.g. "down". If the device is not marked "up" the device's configuration will not be collected. It is highly recommended that comments are made for any router not listed as up, so as to indicate the reason a router is not to be polled, e.g.:

dial1.paris:cisco:up:
core1.paris:cisco:down:in testing until 5/5/2001.
core2.paris:cisco:ticketed:Ticket 6054234, 5/3/2001
border1.paris:juniper:up:

The script "downreport" in util/ can be used to produce a report of routers in router.db that are not marked "up".

[comments]

Freeform string to describe the current state of the router.

A ``#'' at the begining of a line is a comment; the entire line is ignored.

If a device is deleted from the router.db file, then rancid will clean up by removing the device's config file from $BASEDIR/<group>/configs. The device will be removed from the revision control system. It is possible, in most cases, to resurrect or check-out copies of deleted device configurations.

FILES

$BASEDIR/<group>/router.db

Configuration file described here, where <group> is a device group name defined in the variable LIST_OF_GROUPS within $BASEDIR/etc/rancid.conf.

SEE ALSO

control_rancid(1), rancid(1), rancid.conf(5)