sane-pixma

Langue: en

Version: 173748 (fedora - 06/07/09)

Section: 5 (Format de fichier)

NAME

sane-pixma - SANE backend for Canon PIXMA MP series

DESCRIPTION

The sane-pixma library implements a SANE (Scanner Access Now Easy) backend that provides access to Canon PIXMA multi-function devices (All-in-one printers). Currently, the following models work with this backend:
PIXMA MP150, MP160, MP170, MP180, MP450, MP460
PIXMA MP500, MP510, MP530, MP600, MP600R
PIXMA MP800, MP800R, MP810, MP830, MP960
MultiPASS MP700, PIXMA MP750 (no grayscale)

The following models are not well tested and/or the scanner sometimes hangs and must be switched off and on.

SmartBase MP360, MP370, MP390
MultiPASS MP730, PIXMA MP760, PIXMA MP780

The backend supports
* resolutions at 75,150,300,600,1200 and 2400 DPI (still buggy),
* color and grayscale mode,
* a custom gamma table and
* automatic document feeder (only single side).

The device name is in the form pixma:xxxxyyyy_zzzzz where x, y and z are vendor ID, product ID and serial number respectively. Example: pixma:04A91709_123456 is a MP150.

This backend is in alpha stage and will stay in this stage until we get the programming manual for the hardware. Although we have tested it as good as we could, it will not work in every situations. You will find an up-to-date status at the project homepage. (See below)

OPTIONS

Besides "well-known" options (e.g. resolution, mode etc.) pixma backend also provides the following experimental options for button handling, i.e. the options might change in the future.
button-controlled
This option can be used in combination with scanadf(1) and scanimage(1) in batch mode, for example when you want to scan many photos or multiple-page documents. If it is enabled (i.e. is set to true or yes), the backend waits before every scan until the user presses the "SCAN" button (for MP150) or the color-scan button (for other models). Just put the first page in the scanner, press the button, then the next page, press the button and so on. When you finished, press the gray-scan button. (For MP150 you have to stop the frontend by pressing Ctrl-C for example.)
button-update button-1 button-2
These options are interesting for developers. To check button status: (1) set button-1 and button-2 to zero, (2) set button-update (Its type is SANE_TYPE_BUTTON.), (3) get button-1 and button-2. If the result is not zero, the corresponding button was pressed.

FILES

/usr/lib/sane/libsane-pixma.a
The static library implementing this backend.
/usr/lib/sane/libsane-pixma.so
The shared library implementing this backend (present on systems that support dynamic loading).

ENVIRONMENT

SANE_DEBUG_PIXMA
If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. Higher value increases the verbosity.
0 print nothing (default)
1 print error and warning messages (recommended)
2 print informational messages
3 print debug-level messages
10 dump USB traffics
PIXMA_EXPERIMENT
Setting to a non-zero value will enable the support for experimental models. You should also set SANE_DEBUG_PIXMA to 10.

SEE ALSO

sane(7), sane-dll(5), http://home.arcor.de/wittawat/pixma/

AUTHOR

Wittawat Yamwong

I would like to thank all testers and helpers. Without them I would not be able to write subdrivers for models I don't have. See also the project homepage.