srec_ti_txt

Langue: en

Version: SRecord (fedora - 01/12/10)

Section: 5 (Format de fichier)

NAME

srec_ti_txt - Texas Instruments ti[hy]txt (MSP430) file format

DESCRIPTION

The ti[hy]TXT format is used by the Texas Instruments MSP430 familty programming adapter.

The TI[hy]TXT hex format supports 16[hy]bit hexadecimal data. It consists of one or more sections, followed by the end[hy]of[hy]file indicator.

Each section consistes of an at (@) sign followed a execution start address (in hexadecimal), and newline, and then data bytes (in hexadecimal). The section address is followed by a newline. There are to be 16 data bytes per line, except for the last line in a section.

The end[hy]of[hy]file indicator is the letter CW]q followed by a newline. The end[hy]of[hy]file indicator mandatory.

Size Multiplier

In general, binary data will expand in sized by approximately 3.0 times when represented with this format.

EXAMPLE

Here is an example ti[hy]txt file taken from the reference below:
 @F000
 31 40 00 03 B2 40 80 5A 20 01 D2 D3 22 00 D2 E3
 21 00 3F 40 E8 FD 1F 83 FE 23 F9 3F
 @FFFE
 00 F0
 q
 

SEE ALSO

http://www.ti.com/lit/pdf/slau101, section A.2. B]Note: the portion which says addresses must be even, and the number of data bytes in a section must be even, is wrong.
srec_ti_txt version 1.55
Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Peter Miller

The srec_ti_txt program comes with ABSOLUTELY NO WARRANTY; for details use the 'srec_ti_txt -VERSion License' command. This is free software and you are welcome to redistribute it under certain conditions; for details use the 'srec_ti_txt -VERSion License' command.

AUTHOR

Peter Miller E[hy]Mail: pmiller@opensource.org.au
/\/\* WWW: http://miller.emu.id.au/pmiller/