srec_ti_txt

Langue: en

Autres versions - même langue

Version: SRecord (debian - 07/07/09)

Section: 5 (Format de fichier)

Sommaire

NAME

srec_ti_txt - Texas Instruments ti-txt (MSP430) file format

DESCRIPTION

The ti-TXT format is used by the Texas Instruments MSP430 familty programming adapter.

The TI-TXT hex format supports 16-bit hexadecimal data. It consists of one or more sections, followed by the end-of-file indicator.

Each section consistes of an at (@) sign followed a start address (in hexadecimal), and newline, and then data bytes (in hexadecimal). The section address is followed by a newline. There are to be 16 data bytes per line, except for the last line in a section.

The end-of-file indicator is the letter q followed by a newline. The end-of-file indicator mandatory.

Size Multiplier

In general, binary data will expand in sized by approximately 3.0 times when represented with this format.

EXAMPLE

Here is an example ti-txt file taken from the reference below: 
 @F000
 31 40 00 03 B2 40 80 5A 20 01 D2 D3 22 00 D2 E3
 21 00 3F 40 E8 FD 1F 83 FE 23 F9 3F
 @FFFE
 00 F0
 q

SEE ALSO

http://www.ti.com/lit/pdf/slau101, section A.2. Note: the portion which says addresses must be even, and the number of data bytes in a section must be even, is wrong.
srec_ti_txt version 1.39
Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Peter Miller

The srec_ti_txt program comes with ABSOLUTELY NO WARRANTY; for details use the 'srec_ti_txt -VERSion License' command. This is free software and you are welcome to redistribute it under certain conditions; for details use the 'srec_ti_txt -VERSion License' command.

AUTHOR

Peter Miller E-Mail: millerp@canb.auug.org.au
/\/\* WWW: http://www.canb.auug.org.au/~millerp/