eexpress-diag

Langue: en

Version: March 8, 2001 (ubuntu - 08/07/09)

Section: 8 (Commandes administrateur)

NAME

eexpress-diag - Diagnostic program for Intel EtherExpress 16

SYNOPSIS

eexpress-diag [options]

DESCRIPTION

eexpress-diag is a programm which you can use to diagnose problems with your Intel EtherExpress 16 cards.

OPTIONS

These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included below.
-h, --help
Show summary of options.
-V, --version
Show version of program.
-v, --verbose
Verbose mode.
-a, --all
Print all registers.
-p, --base-address <port>
Specify port to use. Valid values are: 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0x360
-Q, -i, --irq <irq>
Specify new interrupt. Valid values are: 3-5,9-12,15.
-w, --write-EEPROM <values>
Write to the EEPROMS with the specified values.

SEE ALSO

mii-diag(8)

AUTHOR

This manual page was written by Alain Schroeder <alain@debian.org>, for the Debian GNU/Linux system (but may be used by others).