Rechercher une page de manuel
openipmicmd
Langue: en
Version: 179455 (CentOS - 06/07/09)
Section: 1 (Commandes utilisateur)
NAME
openipmicmd - An IPMI Command InterfaceSYNOPSIS
openipmicmd [-k entry-to-execute] <connection parms>DESCRIPTION
The openipmicmd program allows a user to execute direct IPMI commands. It can work with direct interface with the OpenIPMI driver or with IPMI LAN interfaces.OPTIONS
- -k entry-to-execute
- Execute a single command an exit.
- <connectionparms>
- The parameters for the connection depend on the connection type. These are all described in openipmi_conparms (7)
COMMANDS
Once up, you can execute commands in the user interface. Note that commands and responses are asynchronous, you issue a command and the interface returns immediately. When the response comes back, it will be dumped on your console. That's a little strange looking, but IPMI is ansychronous underneath. Note that the -k option is synchronous, it will wait for the response or a timeout before returning.
- 0f lun netfn cmd [data1 [data2 ...]]
- Send a command to the BMC you are connected to.
- channel [ipmb] IPMB-addr lun netfn cmd [data1 [data2 ...]]
- Send a command to a device on the IPMB bus. The "ipmb" string is optional.
- channel 00 IPMB-addr lun netfn cmd [data1 [data2 ...]]
- Send a broadcast command to a device on the IPMB bus.
- channel lan handle remote-swid local-swid lun netfn cmd [data1 [data ...]]
- Send a command to a device over a LAN channel. Note that this not the same as a LAN connection. This sends a message through a local BMC to a remote system that is hooked up with a LAN connection.
- test_lat count command
- Executes the given commands (one of the previous commands) count times and gives the average time per command to execute. Note that "count" is hexadecimal.
- help
- Display some help.
- regcmd netfn cmd
- Register to receive the given command. If the driver receives an external command, it will print it out. This only works with system interface connections, it will not work on LAN connections.
- unregcmd netfn cmd
- Remove a command registration.
SEE ALSO
ipmi_ui(1), ipmilan(8), openipmi_conparms(7)KNOWN PROBLEMS
The asychronous nature of the program can be annoying.AUTHOR
Corey Minyard <cminyard@mvista.org>
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre