r3d_objects

Langue: en

Version: 8 May 1999 (ubuntu - 07/07/09)

Section: 1 (Commandes utilisateur)

NAME

rd3_objects - object types used by the Raster3D package

DESCRIPTION

These are the object descriptor types, and the required parameters, recognized by the render program and other components of the Raster3D package.

Object type 1 - triangle

x1, y1, z1, x2, y2, z2, x3, y3, z3, red, green, blue;

Object type 2 - sphere

x, y, z, radius, red, green, blue;

Object type 3 - cylinder with round ends

x1, y1, z1, R1, x2, y2, z2, R2, red, green, blue.
 (R1 is the cylinder radius, R2 is currently ignored).

Object type 4 - not used


 

Object type 5 - cylinder with flat ends

x1, y1, z1, R1, x2, y2, z2, R2, red, green, blue.
 (R1 is the cylinder radius, R2 is currently ignored).

Object type 6 - plane

x1, y1, z1, x2, y2, z2, x3, y3, z3, red, green, blue;
 The plane is defined by any three points. It's color fades from full intensity in the foreground to half-intensity at the back.

Object type 7 - Vertex normals

Explicit vertex normals for preceding triangle object. This object must directly follow the triangle object, and uses the same format.

Object type 8 - Material properties.

These values override the specification of lighting and specular highlighting in the header records, allowing some objects to have different surface properties from the rest. The specified values will apply to all subsequent objects until an object of type 9 is encountered. The parameters are read as free format floating point numbers from the next line of the input stream:
 8
 MPHONG MSPEC SR SG SB CLRITY OPT1 OPT2 OPT3 OPT4
 
MPHONG
override global Phong power for specular highlighting
MSPEC
override global specular scattering contribution
SR,SG,SB
RGB triple specifying color of reflected light (by default all specular highlights are white) A negative value for any component will default to the base colour component of the object being rendered.
CLRITY
The degree of transparency for this material, with 0.0 indicating an opaque surface and 1.0 a purely transparent one.
OPT1
Affects processing of transparent objects which belong to the same material, but occlude each other (for instance the front and back surfaces of a transparent molecular surface).
 OPT1 = 0 will render all transparent surfaces
 OPT1 = 1 will render only the topmost surface
 OPT1 = 2 will render back surface of transparent spheres and cylinders
OPT2
Not used
OPT3
Not used
OPT4
Non-zero to indicate that additional modifier records follow immediately. Each modifier must constitute a single line, and OPT4 tells how many of these lines there will be.

Object type 9 - End_material

Terminates previous set of special material properties.

Object types 10,11,12 - Label descriptors

These object types are used as label descriptors. The current version of render recognizes them as labels, but otherwise ignores them. See r3dtops(l) and label3d(l) for more information.
Object type 10 - font_name size alignment
Legal values subject to details of font processing implementation. In the context of label3d/r3dtops/ghostscript processing,
 font_name is any PostScript font name
 size is the font size in points (but see label3d notes)
 alignment is "Left", "Right", "Center", or "Offset".

Default is "Times-Bold" 10 "Left"

Object type 11 - Label text

 X Y Z R G B     (On one line) label position and color
 Label text      (On 2nd line)

Object type 13 - Glow light source.

This is a colored, non-shadowing, light source with finite [x y z] coordinates and a limited range of illumination. Control parameters are read in free format from a single line of input following the line specifying the object type.
 13
 GLOWSRC(3) GLOWRAD GLOW GOPT GPHONG GLOWCOL(3)
GLOWSRC(3)
[x y z] coordinates of light source
GLOWRAD
limiting radius of light source (see GOPT)
GLOW
fractional contribution (0.0 - 1.0) of glow light to total lighting model
GOPT
(integer 0/1/2/3/...) - controls functional form in which limiting radius is applied [under development]
GPHONG
Phong parameter controlling specular highlights from glow light
GLOWCOL(3)
RGB triple specifying color of glow light source

Object type 14 - Quadric surface


   x, y, z, limiting_radius, red, green, blue, A, B, C, D, E, F, G, H, I, J
  Quadric surfaces include spheres, cones, ellipsoids, paraboloids, and hyperboloids. The motivation for this code was to allow rendering thermal ellipsoids for atoms, so the other shapes have not been extensively tested. A quadric surface is described by 10 parameters (A...J). Although these parameters are sufficient to describe a quadric surface located anywhere, for efficiency during rendering it is also useful to know the center and a bounding sphere. So by convention we require that (A...J) describe a surface centered at the origin, and add additional parameters x, y, z to add a translation component. Therefore a QUADRIC descriptor to render has the 17 parameters listed above.

The surface is the set of points for which Q(x,y,z) = 0 where
 
 Q(x,y,z) = Ax2 + By2 + Cz2 + 2Dxy + 2Eyz + 2Fzx + 2Gx + 2Hy + 2Iz + J 
  Points further from the origin (prior to translation!) than the limiting radius are not rendered.

Object type 15 - TMAT Isolation

Objects following this descriptor are interpreted as being in an absolute coordinate system centered at the origin and having unit extent in X, Y, and Z. If the image is rectangular, coordinates run from -0.5 to +0.5 along both X and Y. If the image is rectangular, coordinates run from -0.5 to +0.5 along the shorter dimension. The rotation and translation described by the TMAT matrix is not applied. This isolation from TMAT applies to subsequent objects until an object of type 9 is encountered.

Object type 16 - Global property

Object type 16 is always followed by a single record that affects the rendering of the entire scene. Currently the options are FOG, FRONTCLIP, and BACKCLIP. There are also options ROTATION and TRANSLATION that affect only objects following their appearance in the input stream.

Object type 17 - Vertex colours

Explicit vertex colours for preceding triangle or cylinder object.
    R1 G1 B1   R2 G2 B2   R3 G3 B3

Object type 18 - Vertex transparency

Explicit transparency at vertices of preceding object. All three values are required, though only the first two are used for cylinders, and only the first one for spheres.
    Trans1 Trans2 Trans3

Object type 19 - TMAT Isolation

Similar to object type 15, except the the x and y scales are the same only in the case of a square image. Both the x and y axes run from -0.5 to +0.5 regardless of the aspect ratio of the rendered image.

SEE ALSO


 PostScript and HTML documentation
 render(l), label3d(l)