Rechercher une page de manuel
PostScript::File.3pm
Langue: en
Version: 2009-10-29 (ubuntu - 24/10/10)
Section: 3 (Bibliothèques de fonctions)
Sommaire
- NAME
- VERSION
- SYNOPSIS
- DESCRIPTION
- CONSTRUCTOR
- MAIN METHODS
- ACCESS METHODS
- get_filename()
- set_filename( file, [dir] )
- get_file_ext()
- set_file_ext( file_ext )
- get_strip
- set_strip( none | space | comments )
- get_page_landscape( [page] )
- set_page_landscape( [[page,] landscape] )
- get_page_clipping( [page] )
- set_page_clipping( [[page,] clipping] )
- get_page_label()
- set_page_label( [page] )
- get_incpage_handler()
- set_incpage_handler( [handler] )
- get_bounding_box()
- set_bounding_box( x0, y0, x1, y1 )
- get_page_bounding_box( [page] )
- set_page_bounding_box( [page], x0, y0, x1, y1 )
- set_page_margins( [page], left, bottom, right, top )
- get_ordinal( [page] )
- get_pagecount()
- set_variable( key, value )
- get_variable
- set_page_variable( key, value )
- get_page_variable
- get_ghostscript
- CONTENT METHODS
- get_comments()
- add_comment( comment )
- get_preview()
- add_preview( width, height, depth, lines, preview )
- get_defaults()
- add_default( default )
- get_resources()
- add_resource( type, name, params, resource )
- get_functions()
- add_function( name, code )
- has_function( name )
- embed_document( filename )
- get_setup()
- set_setup( code )
- get_page_setup()
- set_page_setup( code )
- get_page( [page] )
- add_to_page( [page], code )
- get_page_trailer()
- set_page_trailer( code )
- get_trailer()
- set_trailer( code )
- POSTSCRIPT DEBUGGING SUPPORT
- EXPORTED FUNCTIONS
- BUGS AND LIMITATIONS
- AUTHOR
- LICENSE AND COPYRIGHT
- SEE ALSO
- DISCLAIMER OF WARRANTY
NAME
PostScript::File - Base class for creating Adobe PostScript filesVERSION
This document describes version 1.05 of PostScript::File, released October 29, 2009.SYNOPSIS
use PostScript::File qw(check_tilde check_file incpage_label incpage_roman);
Simplest
An 'hello world' program:use PostScript::File; my $ps = PostScript::File->new(); $ps->add_to_page( <<END_PAGE ); /Helvetica findfont 12 scalefont setfont 72 300 moveto (hello world) show END_PAGE $ps->output( "~/test" );
All options
my $ps = PostScript::File->new( paper => 'Letter', height => 500, width => 400, bottom => 30, top => 30, left => 30, right => 30, clip_command => 'stroke', clipping => 1, eps => 1, dir => '~/foo', file => "bar", landscape => 0, headings => 1, reencode => 'cp1252', font_suffix => '-iso', errors => 1, errmsg => 'Failed:', errfont => 'Helvetica', errsize => 12, errx => 72, erry => 300, debug => 2, db_active => 1, db_xgap => 120, db_xtab => 8, db_base => 300, db_ytop => 500, db_color => '1 0 0 setrgbcolor', db_font => 'Times-Roman', db_fontsize => 11, db_bufsize => 256, );
DESCRIPTION
This module is designed to support other PostScript:: modules. For top level modules that output something useful, seePostScript::Calendar PostScript::Report PostScript::Graph::Bar PostScript::Graph::Stock PostScript::Graph::XY
An outline Adobe PostScript file is constructed. Functions allow access to each of Adobe's Document Structuring Convention (DSC) sections and control how the pages are constructed. It is possible to construct and output files in either normal PostScript (*.ps files) or as Encapsulated Postscript (*.epsf or *.epsi files). By default a minimal file is output, but support for font encoding, postscript error reporting and debugging can be built in if required.
Documents can typically be built using only these functions:
new The constructor, with many options add_function Add postscript functions to the prolog add_to_page Add postscript to construct each page newpage Begins a new page in the document output Construct the file and saves it
The rest of the module involves fine-tuning this. Some settings only really make sense when given once, while others can control each page independently. See new for the functions that duplicate option settings, they all have get_ counterparts. The following provide additional support.
get/set_bounding_box get/set_page_bounding_box get/set_page_clipping get/set_page_landscape set_page_margins get_ordinal get_pagecount draw_bounding_box clip_bounding_box
The functions which insert entries into each of the DSC sections all begin with 'add_'. They also have get_ counterparts.
add_comment add_preview add_default add_resource add_function add_setup add_page_setup add_to_page add_page_trailer add_trailer
Finally, there are a few stand-alone functions. These are not methods and are available for export if requested.
check_tilde check_file incpage_label incpage_roman
CONSTRUCTOR
new( options )
Create a new PostScript::File object, either a set of pages or an Encapsulated PostScript (EPS) file. Options are hash keys and values. All values should be in the native postscript units of 1/72 inch.Example
$ref = new PostScript::File ( eps => 1, landscape => 1, width => 216, height => 288, left => 36, right => 44, clipping => 1 );
This creates an encapsulated postscript document, 4 by 3 inch pages printing landscape with left and right margins of around half an inch. The width is always the shortest side, even in landscape mode. 3*72=216 and 4*72=288. Being in landscape mode, these would be swapped. The bounding box used for clipping would then be from (50,0) to (244,216).
"options" may be a single hash reference instead of an options list, but the hash must have the same structure. This is more convenient when used as a base class.
In addition, the following keys are recognized.
File size keys
There are four options which control how much gets put into the resulting file.debug
- undef
- No debug code is added to the file. Of course there must be no calls to debug functions in the postscript code.
- 0
- db_ functions are replaced by dummy functions which do nothing.
- 1
- A range of functions are added to the file to support debugging postscript. This switch is similar to the 'C' "NDEBUG" macro in that debugging statements may be left in the postscript code but their effect is removed.
Of course, being an interpreted language, it is not quite the same as the calls still takes up space - they just do nothing. See ``POSTSCRIPT DEBUGGING SUPPORT'' for details of the functions.
- 2
- Loads the debug functions and gives some reassuring output at the start and a stack dump at the end of each page.
A mark is placed on the stack at the beginning of each page and 'cleartomark' is given at the end, avoiding potential "invalidrestore" errors. Note, however, that if the page does not end with a clean stack, it will fail when debugging is turned off.
errors
PostScript has a nasty habit of failing silently. Setting this to 1 prints fatal error messages on the bottom left of the paper. For user functions, a postscript function report_error is defined. This expects a message string on the stack, which it prints before stopping. (Default: 1)
headings
Enable PostScript comments such as the date of creation and user's name.
reencode
Requests that a font re-encode function be added and that the 13 standard PostScript fonts get re-encoded in the specified encoding. The only allowed values are "cp1252", "iso-8859-1", and "ISOLatin1Encoding". In most cases, you should set this to "cp1252", even if you are not using Windows.
Setting this to "cp1252" or "iso-8859-1" also causes the document to be encoded in that character set. Any strings you add to the document that have the UTF8 flag set will be reencoded automatically. Strings that do not have the UTF8 flag are expected to be in the correct character set already. This means that you should be able to set this to "cp1252", use Unicode characters in your code and the ``-iso'' versions of the fonts, and just have it do the right thing.
Windows code page 1252 (aka WinLatin1) is a superset of the printable characters in iso-8859-1 (aka Latin1). It adds a number of characters that are not in Latin1, especially common punctuation marks like the curly quotation marks, en & em dashes, Euro sign, and ellipsis. <http://en.wikipedia.org/wiki/Windows-1252>
For backwards compatibility with versions of PostScript::File older than 1.05, setting this to "ISOLatin1Encoding" reencodes the fonts, but does not do any character set translation in the document.
Initialization keys
There are a few initialization settings that are only relevant when the file object is constructed.bottom
The margin in from the paper's bottom edge, specifying the non-printable area. Remember to specify "clipping" if that is what is wanted. (Default: 28)
clip_command
The bounding box is used for clipping if this is set to ``clip'' or is drawn with ``stroke''. This also makes the whole page area available for debugging output. (Default: ``clip'').
clipping
Set whether printing will be clipped to the file's bounding box. (Default: 0)
dir
An optional directory for the output file. See </set_filename>. If no "file" is specified, "dir" is ignored.
eps
Set to 1 to produce Encapsulated PostScript. get_eps returns the value set here. (Default: 0)
png
Set to 1 to produce a PNG image instead of PostScript code. (Default: 0) Requires Ghostscript (<http://pages.cs.wisc.edu/~ghost/>).
gs
The pathname of the Ghostscript application. (Default: gs) Relevant only if PNG output is selected.
file
The name of the output file. See </set_filename>.
file_ext
The extension for the output file. See </set_file_ext>.
font_suffix
This string is appended to each font name as it is reencoded. (Default: ``-iso'')
The standard fonts are named Courier, Courier-Bold, Courier-BoldOblique, Courier-Oblique, Helvetica, Helvetica-Bold, Helvetica-BoldOblique, Helvetica-Oblique, Times-Roman, Times-Bold, Times-BoldItalic, Times-Italic, and Symbol. The string value is appended to these to make the new names.
Example
$ps = PostScript::File->new( font_suffix => "-iso", reencode => "ISOLatin1Encoding" );
``Courier'' still has the standard mapping while ``Courier-iso'' includes the additional European characters.
height
Set the page height, the longest edge of the paper. (Default taken from "paper")
The paper size is set to ``Custom''. get_width and get_height return the values set here.
landscape
Set whether the page is oriented horizontally (1) or vertically (0). (Default: 0)
In landscape mode the coordinates are rotated 90 degrees and the origin moved to the bottom left corner. Thus the coordinate system appears the same to the user, with the origin at the bottom left.
left
The margin in from the paper's left edge, specifying the non-printable area. Remember to specify "clipping" if that is what is wanted. (Default: 28)
paper
Set the paper size of each page. A document can be created using a standard paper size without having to remember the size of paper using PostScript points. Valid choices are currently A0, A1, A2, A3, A4, A5, A6, A7, A8, A9, B0, B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, Executive, Folio, 'Half-Letter', Letter, 'US-Letter', Legal, 'US-Legal', Tabloid, 'SuperB', Ledger, 'Comm #10 Envelope', 'Envelope-Monarch', 'Envelope-DL', 'Envelope-C5', 'EuroPostcard'. (Default: ``A4'')
You can also give a string in the form 'WIDTHxHEIGHT', where WIDTH and HEIGHT are numbers (in points). This sets the paper size to ``Custom''.
This also sets "width" and "height". get_paper returns the value set here.
right
The margin in from the paper's right edge. It is a positive offset, so "right=36" will leave a half inch no-go margin on the right hand side of the page. Remember to specify "clipping" if that is what is wanted. (Default: 28)
top
The margin in from the paper's top edge. It is a positive offset, so "top=36" will leave a half inch no-go margin at the top of the page. Remember to specify "clipping" if that is what is wanted. (Default: 28)
width
Set the page width, the shortest edge of the paper. (Default taken from "paper")
Debugging support keys
This makes most sense in the postscript code rather than perl. However, it is convenient to be able to set defaults for the output position and so on. See ``POSTSCRIPT DEBUGGING SUPPORT'' for further details.db_active
Set to 0 to temporarily suppress the debug output. (Default: 1)
db_base
Debug printing will not occur below this point. (Default: 6)
db_bufsize
The size of string buffers used. Output must be no longer than this. (Default: 256)
db_color
This is the whole postscript command (with any parameters) to specify the colour of the text printed by the debug routines. (Default: ``0 setgray'')
db_font
The name of the font to use. (Default: ``Courier'')
Courier Courier-Bold Courier-BoldOblique Courier-Oblique Helvetica Helvetica-Bold Helvetica-BoldOblique Helvetica-Oblique Times-Roman Times-Bold Times-BoldItalic Times-Italic Symbol
db_fontsize
The size of the font. Postscript uses its own units, but they are almost points. (Default: 10)
db_xgap
Typically, the output comprises single values such as a column showing the stack contents. "db_xgap" specifies the width of each column. By default, this is calculated to allow 4 columns across the page.
db_xpos
The left edge, where debug output starts. (Default: 6)
db_xtab
The amount indented by "db_indent". (Default: 10)
db_ytop
The top line of debugging output. Defaults to 6 below the top of the page.
Error handling keys
If "errors" is set, the position of any fatal error message can be controlled with the following options. Each value is placed into a postscript variable of the same name, so they can be overridden from within the code if necessary.errfont
The name of the font used to show the error message. (Default: ``Courier-Bold'')
errmsg
The error message comprises two lines. The second is the name of the postscript error. This sets the first line. (Default: ``ERROR:'')
errsize
Size of the error message font. (Default: 12)
errx
X position of the error message on the page. (Default: (72))
erry
Y position of the error message on the page. (Default: (72))
Document structure
There are options which only affect the DSC comments. They all have get_ functions which return the values set here, e.g. get_title returns the value given to the title option.extensions
Declare and PostScript language extensions that need to be available. (No default)
langlevel
Set the PostScript language level. (No default)
order
Set the order the pages are defined in the document. It should one of ``Ascend'', ``Descend'' or ``Special'' if a document manager must not reorder the pages. (No default)
title
Set the document's title as recorded in PostScript's Document Structuring Conventions. (No default)
version
Set the document's version as recorded in PostScript's Document Structuring Conventions. This should be a string with a major, minor and revision numbers. For example ``1.5 8'' signifies revision 8 of version 1.5. (No default)
Miscellaneous
A few options that may be changed between pages or set here for the first page.incpage_handler
Set the initial value for the function which increments page labels. See ``set_incpage_handler''.
page
Set the label (text or number) for the initial page. See ``set_page_label''. (Default: ``1'')
strip
Set whether the PostScript code is filtered. "space" strips leading spaces so the user can indent freely without increasing the file size. "comments" remove lines beginning with '%' as well. "none" does no filtering. (Default: ``space'')
MAIN METHODS
newpage( [page] )
Generate a new PostScript page, unless in a EPS file when it is ignored.If "page" is not specified the page number is increased each time a new page is requested.
"page" can be a string or a number. If anything other than a simple integer, you probably should register your own counting function with set_incpage_handler. Of course there is no need to do this if a page string is given to every newpage call.
output( [filename [, dir]] )
Writes the current PostScript out to the named file provided a filename has been given either here, to new or set_filename. If no filename is given, the text is returned by the function.Use this option whenever output is required to disk. The current PostScript document in memory is not cleared, and can still be extended.
ACCESS METHODS
Use these get_ and set_ methods to access a PostScript::File object's data.get_filename()
set_filename( file, [dir] )
- "file"
- An optional fully qualified path-and-file, a simple file name, or "" which stands for the special file File::Spec->devnull().
- "dir"
- An optional directory "dir". If present (and "file" is not already an absolute path), it is prepended to "file". If no "file" was specified, "dir" is ignored.
Specify the root file name for the output file(s) and ensure the resulting absolute path exists. This should not include any extension. ".ps" will be added for ordinary postscript files. EPS files have an extension of ".epsf" without or ".epsi" with a preview image. (Unless you set the extension manually; see ``set_file_ext''.)
If "eps" has been set, multiple pages will have the page label appended to the file name.
Example
$ps = PostScript::File->new( eps => 1 ); $ps->set_filename( "pics", "~/book" ); $ps->newpage("vi"); ... draw page $ps->newpage("7"); ... draw page $ps->newpage(); ... draw page $ps->output();
The three pages for user 'chris' on a unix system would be:
/home/chris/book/pics-vi.epsf /home/chris/book/pics-7.epsf /home/chris/book/pics-8.epsf
It would be wise to use set_page_bounding_box explicitly for each page if using multiple pages in EPS files.
get_file_ext()
set_file_ext( file_ext )
If the "file_ext" is undef (the default), then the extension is set automatically based on the output type, as explained under ``set_filename''. If "file_ext" is the empty string, then no extension will be added to the filename. Otherwise, it should be a string like '.ps' or '.eps'. (But setting this has no effect on the actual type of the output file, only its name.)get_strip
set_strip( none | space | comments )
Determine whether the postscript code is filtered. "space" strips leading spaces so the user can indent freely without increasing the file size. "comments" remove lines beginning with '%' as well.get_page_landscape( [page] )
set_page_landscape( [[page,] landscape] )
Inspect and change whether the page specified is oriented horizontally (1) or vertically (0). The default is the global setting as returned by get_landscape. If "page" is omitted, the current page is assumed.get_page_clipping( [page] )
set_page_clipping( [[page,] clipping] )
Inspect and change whether printing will be clipped to the page's bounding box. (Default: 0)get_page_label()
set_page_label( [page] )
Inspect and change the number or label for the current page. (Default: ``1'')This will be automatically incremented using the function set by set_incpage_hander.
get_incpage_handler()
set_incpage_handler( [handler] )
Inspect and change the function used to increment the page number or label. The following suitable values for "handler" refer to functions defined in the module:\&PostScript::File::incpage_label \&PostScript::File::incpage_roman
The default (incpage_label) increments numbers and letters, the other one handles roman numerals up to 39. "handler" should be a reference to a subroutine that takes the current page label as its only argument and returns the new one. Use this to increment pages using roman numerals or custom orderings.
get_bounding_box()
set_bounding_box( x0, y0, x1, y1 )
Inspect or change the bounding box for the whole document, showing only the area inside.Clipping is enabled. Call with set_clipping with 0 to stop clipping.
get_page_bounding_box( [page] )
set_page_bounding_box( [page], x0, y0, x1, y1 )
Inspect or change the bounding box for a specified page. If "page" is not specified, the current page is assumed, otherwise it should be a page label already given to newpage or set_page_label. The page bounding box defaults to the paper area.Note that this automatically enables clipping for the page. If this isn't what you want, call set_page_clipping with 0.
set_page_margins( [page], left, bottom, right, top )
An alternative way of changing a single page's bounding box. Unlike the options given to new, the parameters here are the gaps around the image, not the paper. So "left=36" will set the left side in by half an inch, this might be a short side if "landscape" is set.Note that this automatically enables clipping for the page. If this isn't what you want, call set_page_clipping with 0.
get_ordinal( [page] )
Return the internal number for the page label specified. (Default: current page)Example
Say pages are numbered ``i'', ``ii'', ``iii, ''iv``, ''1``, ''2``, ''3".
get_ordinal("i") == 0 get_ordinal("iv") == 3 get_ordinal("1") == 4
get_pagecount()
Return the number of pages currently known.set_variable( key, value )
Assign a user defined hash key and value. Provided to keep track of states within the PostScript code, such as which dictionaries are currently open. PostScript::File does not use this - it is provided for client programs. It is recommended that "key" is the module name to avoid clashes. This entry could then be a hash holding any number of user variables.get_variable
Retrieve a user defined value.set_page_variable( key, value )
Assign a user defined hash key and value only valid on the current page. Provided to keep track of states within the PostScript code, such as which styles are currently active. PostScript::File does not use this (except to clear it at the start of each page). It is recommended that "key" is the module name to avoid clashes. This entry could then be a hash holding any number of user variables.get_page_variable
Retrieve a user defined value.get_ghostscript
Return the ghostscript interpreter that would be used to output a Portable Network Graphics file.CONTENT METHODS
get_comments()
add_comment( comment )
Most of the required and recommended comments are set directly, so this function should rarely be needed. It is provided for completeness so that comments such as "DocumentNeededResources:" can be added. The comment should be the bare PostScript DSC name and value, with additional lines merely prefixed by "+".Example
$ps->add_comment("ProofMode: NotifyMe"); $ps->add_comment("Requirements: manualfeed"); $ps->add_comment("DocumentNeededResources:"); $ps->add_comment("+ Paladin"); $ps->add_comment("+ Paladin-Bold");
get_preview()
add_preview( width, height, depth, lines, preview )
Use this to add a Preview in EPSI format - an ASCII representation of a bitmap. If an EPS file has a preview it becomes an EPSI file rather than EPSF.get_defaults()
add_default( default )
Use this to add any PostScript DSC comments to the Defaults section. These would be typically values like PageCustomColors: or PageRequirements:.get_resources()
add_resource( type, name, params, resource )
- "type"
- A string indicating the DSC type of the resource. It should be one of Document, Resource, File, Font, ProcSet or Feature (case sensitive).
- "name"
- An arbitrary identifier of this resource.
- "params"
- Some resource types require parameters. See the Adobe documentation for details.
- "resource"
- A string containing the postscript code. Probably best provided a 'here' document.
Use this to add fonts or images. add_function is provided for functions.
Example
$ps->add_resource( "File", "My_File1", "", <<END_FILE1 ); ...postscript resource definition END_FILE1
Note that get_resources returns all resources added, including those added by any inheriting modules.
get_functions()
add_function( name, code )
Add user defined functions to the PostScript prolog. Despite the name, it is better to add related functions in the same code section. "name" is an arbitrary identifier of this resource. Best used with a 'here' document.Example
$ps->add_function( "My_Functions", <<END_FUNCTIONS ); % postscript code can be freely indented % as leading spaces and blank lines % (and comments, if desired) are stripped % foo does this... /foo { ... definition of foo } bind def % bar does that... /bar { ... definition of bar } bind def END_FUNCTIONS
Note that get_functions (in common with the others) will return all user defined functions possibly including those added by other classes.
has_function( name )
This returns true if "name" has already been included in the file. The name should identical to that given to ``add_function''.embed_document( filename )
This reads the contents of "filename", which should be a PostScript file. It returns a string with the contents of the file surrounded by %%BeginDocument and %%EndDocument comments, and adds "filename" to the list of document supplied resources.You must pass the returned string to add_to_page or some other method that will actually include it in the document.
get_setup()
set_setup( code )
Direct access to the "%%Begin(End)Setup" section. Use this for "setpagedevice", "statusdict" or other settings that initialize the device or document.get_page_setup()
set_page_setup( code )
Code added here is output before each page. As there is no special provision for %%Page... DSC comments, they should be included here.Note that any settings defined here will be active for each page seperately. Use add_setup if you want to carry settings from one page to another.
get_page( [page] )
add_to_page( [page], code )
The main function for building the postscript output. "page" can be any label, typically one given to set_page_label. (Default: current page)If "page" is not recognized, a new page is added with that label. Note that this is added on the end, not in the order you might expect. So adding ``vi'' to page set ``iii, iv, v, 6, 7, 8'' would create a new page after ``8'' not after ``v''.
Examples
$ps->add_to_page( <<END_PAGE ); ...postscript building this page END_PAGE $ps->add_to_page( "3", <<END_PAGE ); ...postscript building page 3 END_PAGE
The first example adds code onto the end of the current page. The second one either adds additional code to page 3 if it exists, or starts a new one.
get_page_trailer()
set_page_trailer( code )
Code added here is output after each page. It may refer to settings made during set_page_setup or add_to_page.get_trailer()
set_trailer( code )
Add code to the PostScript %%Trailer section. Use this for any tidying up after all the pages are output.POSTSCRIPT DEBUGGING SUPPORT
This section documents the postscript functions which provide debugging output. Please note that any clipping or bounding boxes will also hide the debugging output which by default starts at the top left of the page. Typical new options required for debugging would include the following.$ps = PostScript::File->new ( errors => "page", debug => 2, clipcmd => "stroke" );
The debugging output is printed on the page being drawn. In practice this works fine, especially as it is possible to move the output around. Where the text appears is controlled by a number of postscript variables, most of which may also be given as options to new.
The main controller is "db_active" which needs to be non-zero for any output to be seen. It might be useful to set this to 0 in new, then at some point in your code enable it. Remember that the "debugdict" dictionary needs to be selected in order for any of its variables to be changed. This is better done with "db_on" but it illustrates the point.
/debugdict begin /db_active 1 def end (this will now show) db_show
At any time, the next output will appear at "db_xpos" and "db_ypos". These can of course be set directly. However, after most prints, the equivalent of a 'newline' is executed. It moves down "db_fontsize" and left to "db_xpos". If, however, that would take it below "db_ybase", "db_ypos" is reset to "db_ytop" and the x coordinate will have "db_xgap" added to it, starting a new column.
The positioning of the debug output is changed by setting "db_xpos" and "db_ytop" to the top left starting position, with "db_ybase" guarding the bottom. Extending to the right is controlled by not printing too much! Judicious use of "db_active" can help there.
Postscript functions
x0 y0 x1 y1 cliptoboxThis function is only available if 'clipping' is set. By calling the perl method draw_bounding_box (and resetting with clip_bounding_box) it is possible to use this to identify areas on the page.
$ps->draw_bounding_box(); $ps->add_to_page( <<END_CODE ); ... my_l my_b my_r my_t cliptobox ... END_CODE $ps->clip_bounding_box();
msg report_error
If 'errors' is enabled, this call allows you to report a fatal error from within your postscript code. It expects a string on the stack and it does not return.
All the "db_" variables (including function names) are defined within their own dictionary ("debugdict"). But this can be ignored by all calls originating from within code passed to add_to_page (usually including add_function code) as the dictionary is automatically put on the stack before each page and taken off as each finishes.
any db_show
The workhorse of the system. This takes the item off the top of the stack and outputs a string representation of it. So you can call it on numbers or strings and it will show them. Arrays are printed using "db_array" and marks are shown as '--mark--'.
n msg db_nshow
This shows top "n" items on the stack. It requires a number and a string on the stack, which it removes. It prints out "msg" then the top "n" items on the stack, assuming there are that many. It can be used to do a labelled stack dump. Note that if new was given the option "debug =" 2>, There will always be a '--mark--' entry at the base of the stack. See ``debug''.
count (at this point) db_nshow
db_stack
Prints out the contents of the stack. No stack requirements.
The stack contents is printed top first, the last item printed is the lowest one inspected.
array db_print
The closest this module has to a print statement. It takes an array of strings and/or numbers off the top of the stack and prints them with a space in between each item.
[ (myvar1=) myvar1 (str2=) str2 ] db_print
will print something like the following.
myvar= 23.4 str2= abc
When printing something from the stack you need to take into account the array-building items, too. In the next example, at the point '2 index' fetches 111, the stack holds '222 111 [ (top=)' but 'index' requires 5 to get at 222 because the stack now holds '222 111 [ (top=) 111 (next=)'.
222 111 [ (top=) 2 index (next=) 5 index ] db_print
willl output this.
top= 111 next= 222
It is important that the output does not exceed the string buffer size. The default is 256, but it can be changed by giving new the option "bufsize".
x y msg db_point
It is common to have coordinates as the top two items on the stack. This call inspects them. It pops the message off the stack, leaving x and y in place, then prints all three.
450 666 (starting point=) db_print moveto
would produce:
starting point= ( 450 , 666 )
array db_array
Like ``db_print'' but the array is printed enclosed within square brackets.
var db_where
A 'where' search is made to find the dictionary containing "var". The messages 'found' or 'not found' are output accordingly. Of course, "var" should be quoted with '/' to put the name on the stack, otherwise it will either be executed or force an error.
db_newcol
Starts the next debugging column. No stack requirements.
db_on
Enable debug output
db_off
Disable debug output
db_down
Does a 'carriage-return, line-feed'. No stack requirements.
db_indent
Moves output right by "db_xtab". No stack requirements. Useful for indenting output within loops.
db_unindent
Moves output left by "db_xtab". No stack requirements.
EXPORTED FUNCTIONS
No functions are exported by default, they must be named as required.use PostScript::File qw( check_tilde check_file incpage_label incpage_roman array_as_string str );
incpage_label( label )
The default function for set_incpage_handler which just increases the number passed to it. A useful side effect is that letters are also incremented.incpage_roman( label )
An alternative function for set_incpage_handler which increments lower case roman numerals. It only handles values from ``i'' to ``xxxix'', but that should be quite enough for numbering the odd preface.check_file( file, [dir, [create]] )
- "file"
- An optional fully qualified path-and-file or a simple file name. If omitted, the special file File::Spec->devnull() is returned.
- "dir"
- An optional directory "dir". If present (and "file" is not already an absolute path), it is prepended to "file".
- "create"
- If non-zero, ensure the file exists. It may be necessary to set "dir" to "" or undef.
This ensures the filename returned is valid and in a directory tree which is created if it doesn't exist.
Any leading '~' is expanded to the users home directory. If no absolute directory is given either as part of "file", it is placed within the current directory. Intervening directories are always created. If "create" is set, "file" is created as an empty file, possible erasing any previous file of the same name.
File::Spec|File::Spec is used throughout so file access should be portable.
check_tilde( dir )
Expands any leading '~' to the home directory.array_as_string( array )
Converts a perl array to its postscript representation.str( arrayref )
Converts the referenced array to a string representation suitable for postscript code. If "arrayref" is not an array reference, it is passed through unchanged. This function was designed to simplify passing colours for the postscript function b<gpapercolor> which expects either an RGB array or a greyscale decimal. See ``gpapercolor'' in PostScript::Graph::Paper.pstr( string, [nowrap] )
Converts the string to a string representation suitable for postscript code. If the result is more than 240 characters, it will be broken into multiple lines unless the optional nowrap parameter is true. (A PostScript file should not contain lines with more than 255 characters.)This may also be called as a class or object method.
BUGS AND LIMITATIONS
When making EPS files, the landscape transformation throws the coordinates off. To work around this, avoid the landscape flag and set width and height differently.Most of these functions have only had a couple of tests, so please feel free to report all you find.
AUTHOR
Chris Willmot "<chris AT willmot.co.uk>"Thanks to Johan Vromans for the ISOLatin1Encoding.
As of September 2009, PostScript::File is now being maintained by Christopher J. Madsen "<perl AT cjmweb.net>"
Please report any bugs or feature requests to "<bug-PostScript-File AT rt.cpan.org>", or through the web interface at <http://rt.cpan.org/Public/Bug/Report.html?Queue=PostScript-File>
You can follow or contribute to PostScript::File's development at <http://github.com/madsen/postscript-file>.
LICENSE AND COPYRIGHT
Copyright 2002, 2003 Christopher P Willmot. All rights reserved.Copyright 2009 Christopher J. Madsen. All rights reserved.
This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself. See perlartistic.
SEE ALSO
PostScript Language Document Structuring Conventions Specification Version 3.0 and Encapsulated PostScript File Format Specification Version 3.0 published by Adobe, 1992. <http://partners.adobe.com/asn/developer/technotes/postscript.html>PostScript::Graph::Paper, PostScript::Graph::Style, PostScript::Graph::Key, PostScript::Graph::XY, PostScript::Graph::Bar. PostScript::Graph::Stock. PostScript::Calendar. PostScript::Report.
DISCLAIMER OF WARRANTY
BECAUSE THIS SOFTWARE IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE SOFTWARE, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE SOFTWARE ``AS IS'' WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE SOFTWARE AS PERMITTED BY THE ABOVE LICENSE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE SOFTWARE TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre