remotetrx.conf

Langue: en

Autres versions - même langue

Version: 384802 (fedora - 01/12/10)

Section: 5 (Format de fichier)

NAME

remotetrx.conf - Configuration file for the SvxLink remote transceiver server

DESCRIPTION

remotetrx is the SvxLink remote transceiver server. This man-page describe the configuration file format for it. Remotetrx look for configuration files in a number of places. First it tries to find a user specific configuration file. It will look for a user specific configuration file in two places: $HOME/.svxlink/remotetrx.conf or $HOME/.remotetrxrc. The latter is deprecated. Use the one that will best fit your need. If no user specific configuration file can be found, remotetrx will look for the system wide configuration file /etc/remotetrx.conf. The --config command line option may also be used to specify an arbitrary configuration file.

FILE FORMAT

The configuration file is in the famous INI-file format. A generic example of how such a file might look like is shown below.


  [SECTION1]
  VALUE1=1
  VALUE2="TWO "
  VAULE3="Multi "
         "line"
  
  [SECTION2]
  VALUE1=2

This is a simple format that contain name=value pairs that belong to a section. In written text, a specific configuration variable can be referred to as SECTION1/VALUE2 meaning "configuration variable VALUE2 in section SECTION1". The same variable name can exist in two different sections. For example VALUE1 in section SECTION1 have the value 1 and VALUE1 in section SECTION2 have the value 2. Values containing spaces at the beginning or end of the line must be surrounded by citation characters (see SECTION1/VALUE2). Likewise with a multi line value (see SECTION1/VALUE3).

CONFIGURATION VARIABLES

Here is the description of all configuration variables that remotetrx understands. The configuration variables are described section for section.

GLOBAL

The GLOBAL section contains application global configuration data.
RX
Point out the receiver configuration section to use. Set to NONE if no RX is used. A receiver is configured in the exact same way as in the SvxLink server. Have a look at svxlink.conf(5) for more information on how to configure a receiver.
TX
Point out the transmitter configuration section to use. Set to NONE if no TX is used. A transmitter is configured in the exact same way as in the SvxLink server. Have a look at svxlink.conf(5) for more information on how to configure a transmitter.
UPLINK
Point out the uplink configuration section to use. The uplink section specify how this remote receiver should be linked to the main SvxLink server. The term "uplink" might be a bit confusing for some people. In this case it does not refer to any specific direction in which the data or audio is flowing. It's just the name for the link up to the main SvxLink server.

Read more about how to configure an uplink in the "Network Uplink Section" or "Trx Uplink Section" chapters below.

CFG_DIR
Specify the path to a directory that contain additional configuration files. If a relative path is specified, the path will be relative to the directory where the main configuration file is at. All files in the specified directory will be read as additional configuration. Filenames starting with a dot are ignored.
TIMESTAMP_FORMAT
This variable specifies the format of the timestamp that is written in front of each row in the log file. The format string is in the same format as specified in the strftime(3) manual page. The default is "%c" which is described as: "the preferred date and time representation for the current locale". The environment variables LC_TIME, LC_ALL and LANG will affect how this time format will look. For example, setting LC_TIME="sv_SE.UTF8" will give you swedish timestamp representation. Other examples of format specifiers are:
*
%d - The day of the month as a decimal number (range 01 to 31)
*
%b - The abbreviated month name according to the current locale
*
%Y - The year as a decimal number including the century
*
%H - The hour as a decimal number using a 24-hour clock (range 00 to 23)
*
%M - The minute as a decimal number (range 00 to 59)
*
%S - The second as a decimal number (range 00 to 61) So, TIMESTAMP_FORMAT="%d %b %Y %H:%M:%S" would give a timestamp looking something like: "29 Nov 2005 22:31:59".
CARD_SAMPLE_RATE
This configuration variable determines the sampling rate used for audio input/output. SvxLink always work with a sampling rate of 8kHz internally but there still are som benefits from using a higher sampling rate. On some sound cards the filters look pretty bad at 8kHz and the amplitude response will not be uniform which among other things can cause problems for the software DTMF decoder.

Some sound cards also sound very bad at 8kHz due to insufficient anti-alias filtering or resampling effects. These, often cheeper, sound cards sound OK at 48kHz.

The downside of choosing a higher sampling rate is that it puts a little bit more load on the CPU so if you have a very slow machine (<300MHz), it might not have the computational power to handle it.

Supported sampling rates are: 8000, 16000 and 48000.

The network uplink section is used to specify the configuration for a network link to the main SvxLink server. In the default configuration file there is a network uplink section called NetUpLink.
TYPE
Always "Net" for a networked uplink.
LISTEN_PORT
The TCP port to listen on. The default is 5210.
AUTH_KEY
This is the authentication key (password) to use to athenticate incoming connections. The same key have to be specified in the client configuration. If no key is specified, all logins will be unauthenticated. A good authentication key should be 20 characters long. The key will never be transmitted over the network. A HMAC-SHA1 challenge-response procedure will be used for authentication.
The Trx uplink section is used to specify the configuration for an RF link to the main SvxLink server. In the default configuration file there is a Trx uplink section called TrxUpLink. The section name could be anything. It should match the UPLINK configuration variable in the GLOBAL section.

The use of Trx uplinks is very EXPERIMENTAL and still have some flaws. Among other things, detected tones (like CTCSS or 1750 tone burst) are not relayed and all relayed DTMF tones are always 100ms long no matter how long the received digit was. Signal level measurements are not relayed either.

Any way, it's used to link remote receivers coming in on the Internet to a site that do not have access to Internet.

TYPE
Always "Trx" for a Trx uplink.
TX
Point out the uplink transmitter configuration section to use. The configuration for an uplink transmitter looks exactly the same as for any other transmitter. In the default configuration file there is an uplink transmitter configuration section called UplinkTx.
RX
Point out the uplink receiver configuration section to use. The configuration for an uplink receiver looks exactly the same as for any other receiver. In the default configuration file there is an uplink receiver configuration section called UplinkRx.
MUTE_RX_ON_TX
Specify if the link receiver should be muted or not when the link transmitter is transmitting. Set it to 0 if a full duplex link is desired. Default is 1.
LOOP_RX_TO_TX
Set to 1 to loop incoming RX audio (not link RX) directly to the TX (not link TX). You figure out when to use it. Default is 0.

FILES

/etc/remotetrx.conf
The system wide configuration file.
~/.svxlink/remotetrx.conf or ~/.remotetrxrc
Per user configuration file.
/etc/remotetrx.d/*
Additional configuration files.

AUTHOR

Tobias Blomberg (SM0SVX) <sm0svx at users dot sourceforge dot net>

SEE ALSO

svxlink(1), svxlink.conf(1), remotetrx(1), siglevdetcal(1)