Rechercher une page de manuel
shorewall6-zones
Langue: en
Version: 07/24/2010 (fedora - 01/12/10)
Section: 5 (Format de fichier)
NAME
zones - Shorewall6 zone declaration fileSYNOPSIS
- /etc/shorewall6/zones
DESCRIPTION
- The /etc/shorewall6/zones file declares your network zones. You specify the hosts in each zone through entries in /etc/shorewall6/interfaces or /etc/shorewall6/hosts.
The columns in the file are as follows.
ZONE - zone[:parent-zone[,parent-zone]...]
- Name of the zone. The names "all", "none", "SOURCE" and "DEST" are reserved and may not be used as zone names. The maximum length of a zone name is determined by the setting of the LOGFORMAT option in m[blue]shorewall6.confm[][1](5). With the default LOGFORMAT, zone names can be at most 5 characters long. The maximum length of an iptables log prefix is 29 bytes. As explained in m[blue]shorewall6.confm[][2] (5), the default LOGPREFIX formatting string is lqShorewall:%s:%s:rq where the first %s is replaced by the chain name and the second is replaced by the disposition.
-
- * The default formatting string has 12 fixed characters ("Shorewall" and three colons).
- * The longest of the standard dispositions are ACCEPT and REJECT which have 6 characters each.
- * The canonical name for the chain containing the rules for traffic going from zone 1 to zone 2 is "<zone 1>2<zone 2>".
- * So if M is the maximum zone name length, such chains can have length 2*M + 1.
-
- 12 + 6 + 2*M + 1 = 29 which reduces to
- 2*M = 29 - 12 - 6 - 1 = 10 or
- M = 5
Example:
-
#ZONE TYPE OPTIONS IN OPTIONS OUT OPTIONS a ipv6 b ipv6 c:a,b ipv6
Currently, Shorewall6 uses this information to reorder the zone list so that parent zones appear after their subzones in the list. The IMPLICIT_CONTINUE option in m[blue]shorewall6.confm[][1](5) can also create implicit CONTINUE policies to/from the subzone.
Where an ipsec zone is explicitly included as a child of an ipv6 zone, the ruleset allows CONTINUE policies (explicit or implicit) to work as expected.
In the future, Shorewall6 may make additional use of nesting information.
TYPE
ipv6-
- This is the standard Shorewall6 zone type and is the default if you leave this column empty or if you enter "-" in the column. Communication with some zone hosts may be encrypted. Encrypted hosts are designated using the 'ipsec'option in m[blue]shorewall6-hostsm[][4](5).
ipsec (or ipsec6)
- Communication with all zone hosts is encrypted. Your kernel and ip6tables must include policy match support.
firewall
- Designates the firewall itself. You must have exactly one 'firewall' zone. No options are permitted with a 'firewall' zone. The name that you enter in the ZONE column will be stored in the shell variable $FW which you may use in other configuration files to designate the firewall zone.
bport (or bport6)
- The zone is associated with one or more ports on a single bridge.
vserver
- Added in Shorewall 4.4.11 Beta 2 - A zone composed of Linux-vserver guests. The zone contents must be defined in m[blue]shorewall-hostsm[][5] (5).
OPTIONS, IN OPTIONS and OUT OPTIONS - [option[,option]...]
- A comma-separated list of options. With the exception of the mss option, these only apply to TYPE ipsec zones.
reqid=number -
- where number is specified using setkey(8) using the 'unique:number option for the SPD level.
spi=<number>
- where number is the SPI of the SA used to encrypt/decrypt packets.
proto=ah|esp|ipcomp
- IPSEC Encapsulation Protocol
mss=number
- sets the MSS field in TCP packets. If you supply this option, you should also set FASTACCEPT=No in m[blue]shorewall6.confm[][1](5) to insure that both the SYN and SYN,ACK packets have their MSS field adjusted.
mode=transport|tunnel
- IPSEC mode
tunnel-src=address[/mask]
- only available with mode=tunnel
tunnel-dst=address[/mask]
- only available with mode=tunnel
strict
- Means that packets must match all rules.
next
- Separates rules; can only be used with strict
The options in the OPTIONS column are applied to both incoming and outgoing traffic. The IN OPTIONS are applied to incoming traffic (in addition to OPTIONS) and the OUT OPTIONS are applied to outgoing traffic.
If you wish to leave a column empty but need to make an entry in a following column, use "-".
FILES
/etc/shorewall6/zones
SEE ALSO
m[blue]http://www.shorewall.net/Multiple_Zones.htmlm[].
shorewall6(8), shorewall6-accounting(5), shorewall6-actions(5), shorewall6-blacklist(5), shorewall6-hosts(5), shorewall6-interfaces(5), shorewall6-maclist(5), shorewall6-nesting(8), shorewall6-params(5), shorewall6-policy(5), shorewall6-providers(5), shorewall6-route_rules(5), shorewall6-routestopped(5), shorewall6-rules(5), shorewall6.conf(5), shorewall6-tcclasses(5), shorewall6-tcdevices(5), shorewall6-tcrules(5), shorewall6-tos(5), shorewall6-tunnels(5)
NOTES
- 1.
- shorewall6.conf
- http://www.shorewall.net/manpages6/shorewall6.conf.html
- 2.
- shorewall6.conf
- http://www.shorewall.net/manpages6/shorewall.conf.html
- 3.
- shorewall6-nesting
- http://www.shorewall.net/manpages6/shorewall6-nesting.html
- 4.
- shorewall6-hosts
- http://www.shorewall.net/manpages6/shorewall6-hosts.html
- 5.
- shorewall-hosts
- http://www.shorewall.net/manpages6/shorewall-hosts.html
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre