Langue: en

Version: SRecord (fedora - 01/12/10)

Section: 5 (Format de fichier)


srec_fairchild - Fairchild Fairbug file format


The Fairchild Fairbug format has 8[hy]byte records. A file begins with an address record and ends with an end[hy]of[hy]file record.

There are three record types in this file format.

Address records are of the form

S nnnn
indicating the address for the following data records.

Data records are of the form

X ffffffffffffffff c
Each data record begins with an X and always contains 8 data bytes. The ff characters are hexadecimal byte values (8 bytes). Each data byte is represented by 2 hexadecimal characters. The c character is a hex digit being the the nibble[hy]sum of the data bytes. A 1[hy]digit hexadecimal checksum follows the data in each data record. The checksum represents, in hexadecimal notation, the sum of the binary equivalents of the 16 digits in the record; the half carry from the fourth bit is ignored. The programmer ignores any character (except for address characters and the asterisk character, which terminates the data transfer) between a checksum and the start character of the next data record. This space can be used for comments.

The end[hy]of[hy]file record has the form

The last record consists of an asterisk only, which indicates the end of file.

Size Multiplier

In general, binary data will expand in sized by approximately 2.4 times when represented with this format.


Here is an example Fairchild Fairbug file. It contains the data [lq]Hello, World[rq] to be loaded at address 0x1000. Notice how the last record is padded with 0xFF bytes.

srec_cat version 1.55
Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Peter Miller

The srec_cat program comes with ABSOLUTELY NO WARRANTY; for details use the 'srec_cat -VERSion License' command. This is free software and you are welcome to redistribute it under certain conditions; for details use the 'srec_cat -VERSion License' command.


Peter Miller E[hy]Mail:
/\/\* WWW: