Rechercher une page de manuel
srec_os65v
Langue: en
Version: SRecord (fedora - 06/07/09)
Section: 5 (Format de fichier)
NAME
srec_os65v - OS65V Loader file formatDESCRIPTION
This format is used by Ohio Scientific OS65V-compatible loaders. This family of machines includes the OSI C1P, Superboard II, C2, C4, C8, and Challenger III, as well as the UK101, and Elektor Junior.The file startes with a period '.' (0x2E), to ensure address entry mode. then a 4-digit hex address, followed by a slash '/' (0X2F) to enter the data entry mode. The initial address is always present. There is no need for an additional address record unless there are gaps.
Each data byte is represented as 2 hexadecimal characters, and is separated by a carriage return character (0x0D) (advance address). The final return character may be omitted.
The data is concluded with a period '.' (0x2E) to re-enter address mode. If an address to start execution is specified, then the last 5 bytes are nnnnG where nnnn is the 4-digit execution address, and G is the 'Go' command.
Size Multiplier
In general, binary data will expand in sized by approximately 3.0 times when represented with this format.EXAMPLE
Here is an example ascii-hex file. It contains the data ``Hello, World'' to be loaded at address 0x1000, with execution at 0x1003. (On a 6502, this is the opcode for indirect jump to 0x2C6F.) 1000/48^M65^M6C^M6C^M6F^M2C^M20^M57^M6F^M72^M6C^M64^M0A^M.1010G
COPYRIGHT
srec_cat version 1.47Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Peter Miller
The srec_cat program comes with ABSOLUTELY NO WARRANTY; for details use the 'srec_cat -VERSion License' command. This is free software and you are welcome to redistribute it under certain conditions; for details use the 'srec_cat -VERSion License' command.
AUTHOR
Peter Miller | E-Mail: | pmiller@opensource.org.au |
/\/\* | WWW: | http://miller.emu.id.au/pmiller/ |
Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre