gittutorial-2

Langue: en

Version: 09/30/2010 (fedora - 01/12/10)

Section: 7 (Divers)

NAME

gittutorial-2 - A tutorial introduction to git: part two

SYNOPSIS

git *

DESCRIPTION

You should work through gittutorial(7) before reading this tutorial.

The goal of this tutorial is to introduce two fundamental pieces of gitcqs architecture---the object database and the index file---and to provide the reader with everything necessary to understand the rest of the git documentation.

THE GIT OBJECT DATABASE

Letcqs start a new project and create a small amount of history:

 $ mkdir test-project
 $ cd test-project
 $ git init
 Initialized empty Git repository in .git/
 $ echo 'hello world' > file.txt
 $ git add .
 $ git commit -a -m "initial commit"
 [master (root-commit) 54196cc] initial commit
  1 files changed, 1 insertions(+), 0 deletions(-)
  create mode 100644 file.txt
 $ echo 'hello world!' >file.txt
 $ git commit -a -m "add emphasis"
 [master c4d59f3] add emphasis
  1 files changed, 1 insertions(+), 1 deletions(-)
 

What are the 7 digits of hex that git responded to the commit with?

We saw in part one of the tutorial that commits have names like this. It turns out that every object in the git history is stored under a 40-digit hex name. That name is the SHA1 hash of the objectcqs contents; among other things, this ensures that git will never store the same data twice (since identical data is given an identical SHA1 name), and that the contents of a git object will never change (since that would change the objectcqs name as well). The 7 char hex strings here are simply the abbreviation of such 40 character long strings. Abbreviations can be used everywhere where the 40 character strings can be used, so long as they are unambiguous.

It is expected that the content of the commit object you created while following the example above generates a different SHA1 hash than the one shown above because the commit object records the time when it was created and the name of the person performing the commit.

We can ask git about this particular object with the cat-file command. Doncqt copy the 40 hex digits from this example but use those from your own version. Note that you can shorten it to only a few characters to save yourself typing all 40 hex digits:

 $ git cat-file -t 54196cc2
 commit
 $ git cat-file commit 54196cc2
 tree 92b8b694ffb1675e5975148e1121810081dbdffe
 author J. Bruce Fields <bfields@puzzle.fieldses.org> 1143414668 -0500
 committer J. Bruce Fields <bfields@puzzle.fieldses.org> 1143414668 -0500
 
 initial commit
 

A tree can refer to one or more "blob" objects, each corresponding to a file. In addition, a tree can also refer to other tree objects, thus creating a directory hierarchy. You can examine the contents of any tree using ls-tree (remember that a long enough initial portion of the SHA1 will also work):

 $ git ls-tree 92b8b694
 100644 blob 3b18e512dba79e4c8300dd08aeb37f8e728b8dad    file.txt
 

Thus we see that this tree has one file in it. The SHA1 hash is a reference to that filecqs data:

 $ git cat-file -t 3b18e512
 blob
 

A "blob" is just file data, which we can also examine with cat-file:

 $ git cat-file blob 3b18e512
 hello world
 

Note that this is the old file data; so the object that git named in its response to the initial tree was a tree with a snapshot of the directory state that was recorded by the first commit.

All of these objects are stored under their SHA1 names inside the git directory:

 $ find .git/objects/
 .git/objects/
 .git/objects/pack
 .git/objects/info
 .git/objects/3b
 .git/objects/3b/18e512dba79e4c8300dd08aeb37f8e728b8dad
 .git/objects/92
 .git/objects/92/b8b694ffb1675e5975148e1121810081dbdffe
 .git/objects/54
 .git/objects/54/196cc2703dc165cbd373a65a4dcf22d50ae7f7
 .git/objects/a0
 .git/objects/a0/423896973644771497bdc03eb99d5281615b51
 .git/objects/d0
 .git/objects/d0/492b368b66bdabf2ac1fd8c92b39d3db916e59
 .git/objects/c4
 .git/objects/c4/d59f390b9cfd4318117afde11d601c1085f241
 

and the contents of these files is just the compressed data plus a header identifying their length and their type. The type is either a blob, a tree, a commit, or a tag.

The simplest commit to find is the HEAD commit, which we can find from .git/HEAD:

 $ cat .git/HEAD
 ref: refs/heads/master
 

As you can see, this tells us which branch wecqre currently on, and it tells us this by naming a file under the .git directory, which itself contains a SHA1 name referring to a commit object, which we can examine with cat-file:

 $ cat .git/refs/heads/master
 c4d59f390b9cfd4318117afde11d601c1085f241
 $ git cat-file -t c4d59f39
 commit
 $ git cat-file commit c4d59f39
 tree d0492b368b66bdabf2ac1fd8c92b39d3db916e59
 parent 54196cc2703dc165cbd373a65a4dcf22d50ae7f7
 author J. Bruce Fields <bfields@puzzle.fieldses.org> 1143418702 -0500
 committer J. Bruce Fields <bfields@puzzle.fieldses.org> 1143418702 -0500
 
 add emphasis
 

The "tree" object here refers to the new state of the tree:

 $ git ls-tree d0492b36
 100644 blob a0423896973644771497bdc03eb99d5281615b51    file.txt
 $ git cat-file blob a0423896
 hello world!
 

and the "parent" object refers to the previous commit:

 $ git cat-file commit 54196cc2
 tree 92b8b694ffb1675e5975148e1121810081dbdffe
 author J. Bruce Fields <bfields@puzzle.fieldses.org> 1143414668 -0500
 committer J. Bruce Fields <bfields@puzzle.fieldses.org> 1143414668 -0500
 
 initial commit
 

The tree object is the tree we examined first, and this commit is unusual in that it lacks any parent.

Most commits have only one parent, but it is also common for a commit to have multiple parents. In that case the commit represents a merge, with the parent references pointing to the heads of the merged branches.

Besides blobs, trees, and commits, the only remaining type of object is a "tag", which we woncqt discuss here; refer to git-tag(1) for details.

So now we know how git uses the object database to represent a projectcqs history:

* "commit" objects refer to "tree" objects representing the snapshot of a directory tree at a particular point in the history, and refer to "parent" commits to show how theycqre connected into the project history.
* "tree" objects represent the state of a single directory, associating directory names to "blob" objects containing file data and "tree" objects containing subdirectory information.
* "blob" objects contain file data without any other structure.
* References to commit objects at the head of each branch are stored in files under .git/refs/heads/.
* The name of the current branch is stored in .git/HEAD.

Note, by the way, that lots of commands take a tree as an argument. But as we can see above, a tree can be referred to in many different ways---by the SHA1 name for that tree, by the name of a commit that refers to the tree, by the name of a branch whose head refers to that tree, etc.--and most such commands can accept any of these names.

In command synopses, the word "tree-ish" is sometimes used to designate such an argument.

THE INDEX FILE

The primary tool wecqve been using to create commits is git-commit -a, which creates a commit including every change youcqve made to your working tree. But what if you want to commit changes only to certain files? Or only certain changes to certain files?

If we look at the way commits are created under the cover, wecqll see that there are more flexible ways creating commits.

Continuing with our test-project, letcqs modify file.txt again:

 $ echo "hello world, again" >>file.txt
 

but this time instead of immediately making the commit, letcqs take an intermediate step, and ask for diffs along the way to keep track of whatcqs happening:

 $ git diff
 --- a/file.txt
 +++ b/file.txt
 @@ -1 +1,2 @@
  hello world!
 +hello world, again
 $ git add file.txt
 $ git diff
 

The last diff is empty, but no new commits have been made, and the head still doesncqt contain the new line:

 $ git diff HEAD
 diff --git a/file.txt b/file.txt
 index a042389..513feba 100644
 --- a/file.txt
 +++ b/file.txt
 @@ -1 +1,2 @@
  hello world!
 +hello world, again
 

So git diff is comparing against something other than the head. The thing that itcqs comparing against is actually the index file, which is stored in .git/index in a binary format, but whose contents we can examine with ls-files:

 $ git ls-files --stage
 100644 513feba2e53ebbd2532419ded848ba19de88ba00 0       file.txt
 $ git cat-file -t 513feba2
 blob
 $ git cat-file blob 513feba2
 hello world!
 hello world, again
 

So what our git add did was store a new blob and then put a reference to it in the index file. If we modify the file again, wecqll see that the new modifications are reflected in the git diff output:

 $ echo 'again?' >>file.txt
 $ git diff
 index 513feba..ba3da7b 100644
 --- a/file.txt
 +++ b/file.txt
 @@ -1,2 +1,3 @@
  hello world!
  hello world, again
 +again?
 

With the right arguments, git diff can also show us the difference between the working directory and the last commit, or between the index and the last commit:

 $ git diff HEAD
 diff --git a/file.txt b/file.txt
 index a042389..ba3da7b 100644
 --- a/file.txt
 +++ b/file.txt
 @@ -1 +1,3 @@
  hello world!
 +hello world, again
 +again?
 $ git diff --cached
 diff --git a/file.txt b/file.txt
 index a042389..513feba 100644
 --- a/file.txt
 +++ b/file.txt
 @@ -1 +1,2 @@
  hello world!
 +hello world, again
 

At any time, we can create a new commit using git commit (without the "-a" option), and verify that the state committed only includes the changes stored in the index file, not the additional change that is still only in our working tree:

 $ git commit -m "repeat"
 $ git diff HEAD
 diff --git a/file.txt b/file.txt
 index 513feba..ba3da7b 100644
 --- a/file.txt
 +++ b/file.txt
 @@ -1,2 +1,3 @@
  hello world!
  hello world, again
 +again?
 

So by default git commit uses the index to create the commit, not the working tree; the "-a" option to commit tells it to first update the index with all changes in the working tree.

Finally, itcqs worth looking at the effect of git add on the index file:

 $ echo "goodbye, world" >closing.txt
 $ git add closing.txt
 

The effect of the git add was to add one entry to the index file:

 $ git ls-files --stage
 100644 8b9743b20d4b15be3955fc8d5cd2b09cd2336138 0       closing.txt
 100644 513feba2e53ebbd2532419ded848ba19de88ba00 0       file.txt
 

And, as you can see with cat-file, this new entry refers to the current contents of the file:

 $ git cat-file blob 8b9743b2
 goodbye, world
 

The "status" command is a useful way to get a quick summary of the situation:

 $ git status
 # On branch master
 # Changes to be committed:
 #   (use "git reset HEAD <file>..." to unstage)
 #
 #       new file: closing.txt
 #
 # Changed but not updated:
 #   (use "git add <file>..." to update what will be committed)
 #
 #       modified: file.txt
 #
 

Since the current state of closing.txt is cached in the index file, it is listed as "Changes to be committed". Since file.txt has changes in the working directory that arencqt reflected in the index, it is marked "changed but not updated". At this point, running "git commit" would create a commit that added closing.txt (with its new contents), but that didncqt modify file.txt.

Also, note that a bare git diff shows the changes to file.txt, but not the addition of closing.txt, because the version of closing.txt in the index file is identical to the one in the working directory.

In addition to being the staging area for new commits, the index file is also populated from the object database when checking out a branch, and is used to hold the trees involved in a merge operation. See gitcore-tutorial(7) and the relevant man pages for details.

WHAT NEXT?

At this point you should know everything necessary to read the man pages for any of the git commands; one good place to start would be with the commands mentioned in m[blue]Everyday gitm[][1]. You should be able to find any unknown jargon in gitglossary(7).

The m[blue]Git Usercqs Manualm[][2] provides a more comprehensive introduction to git.

gitcvs-migration(7) explains how to import a CVS repository into git, and shows how to use git in a CVS-like way.

For some interesting examples of git use, see the m[blue]howtosm[][3].

For git developers, gitcore-tutorial(7) goes into detail on the lower-level git mechanisms involved in, for example, creating a new commit.

SEE ALSO

gittutorial(7), gitcvs-migration(7), gitcore-tutorial(7), gitglossary(7), git-help(1), m[blue]Everyday gitm[][1], m[blue]The Git Usercqs Manualm[][2]

GIT

Part of the git(1) suite.

NOTES

1.
Everyday git
file:///usr/share/doc/git-1.7.3.1/everyday.html
2.
Git Usercqs Manual
file:///usr/share/doc/git-1.7.3.1/user-manual.html
3.
howtos
file:///usr/share/doc/git-1.7.3.1/howto-index.html