arping

Langue: en

Version: 363747 (ubuntu - 25/10/10)

Section: 8 (Commandes administrateur)

NAME

arping - sends arp and/or ip pings to a given host

SYNOPSIS

arping [-abdDeFhpqrRd0uv] [-S host/ip] [-T host/ip] [-s MAC] [-t MAC] [-c count] [-i interface] [ -w us ] <host | -B>

arping --help

DESCRIPTION

The arping utility sends ARP and/or ICMP requests to the specified host and displays the replies. The host may be specified by its hostname, its IP address, or its MAC address.

One request is sent each second.

When pinging an IP an ARP who-has query is sent. When pinging a MAC address a directed broadcast ICMP Echo request is sent. For more technical explaination and an FAQ, see the README file.

Note on timing

ARP packets are usually replied to (on a LAN) so fast that the OS task scheduler can't keep up to get exact enough timing. On an idle system the roundtrip times will be pretty much accurate, but with more load the timing gets less exact.

To get more exact timing on a non-idle system, re-nice arping to -15 or so.

# nice -n -15 arping foobar

This is not just an issue with arping, it is with normal ping also (at least it is on my system). But it doesn't show up as much with ping since arping packets (when pinging IP) doesn't traverse the IP stack when received and are therefore replied to faster.

OPTIONS

--help
Show extended help. Not quite as extensive as this manpage, but more than -h.
-0
Use this option to ping with source IP address 0.0.0.0. Use this when you haven't configured your interface yet. Note that this may get the MAC-ping unanswered. This is an alias for -S 0.0.0.0.
-a
Audible ping.
-A
Only count addresses matching requested address (This *WILL* break most things you do. Only useful if you are arpinging many hosts at once. See arping-scan-net.sh for an example).
-b
Like -0 but source broadcast source address (255.255.255.255). Note that this may get the arping unanswered since it's not normal behavior for a host.
-B
Use instead of host if you want to address 255.255.255.255.
-c count
Only send count requests.
-d
Find duplicate replies. Exit with 1 if there are answers from two different MAC addresses.
-D
Display answers as dots and missing packets as exclamation points. Like flood ping on a Cisco.
-e
Like -a but beep when there is no reply.
-F
Don't try to be smart about the interface name. Even if this switch is not given, -i disables this smartness.
-h
Displays a help message and exits.
-i interface
Don't guess, use the specified interface.
-p
Turn on promiscious mode on interface, use this if you don't "own" the MAC address you are using.
-q
Does not display messages, except error messages.
-r
Raw output: only the MAC/IP address is displayed for each reply.
-R
Raw output: Like -r but shows "the other one", can be combined with -r.
-s MAC
Set source MAC address. You may need to use -p with this.
-S IP
Like -b and -0 but with set source address. Note that this may get the arping unanswered if the target does not have routing to the IP. If you don't own the IP you are using, you may need to turn on promiscious mode on the interface (with -p). With this switch you can find out what IP-address a host has without taking an IP-address yourself.
-t MAC
Set target MAC address to use when pinging IP address.
-T IP
Use -T as target address when pinging MACs that won't respond to a broadcast ping but perhaps to a directed broadcast.
Example: To check the address of MAC-A, use knowledge of MAC-B and IP-B.
$ arping -S <IP-B> -s <MAC-B> -p <MAC-A>
-u
Show index=received/sent instead of just index=received when pinging MACs.
-v
Verbose output. Use twice for more messages.
-w
Time to wait between pings, in microseconds.

EXAMPLES

 
 # arping -c 3 88.123.180.225
 ARPING 88.123.180.225
 60 bytes from 00:11:85:4c:01:01 (88.123.180.225): index=0 time=13.910 msec
 60 bytes from 00:11:85:4c:01:01 (88.123.180.225): index=1 time=13.935 msec
 60 bytes from 00:11:85:4c:01:01 (88.123.180.225): index=2 time=13.944 msec
 
 --- 88.123.180.225 statistics ---
 3 packets transmitted, 3 packets received,   0% unanswered
 
 # arping -c 3 00:11:85:4c:01:01
 ARPING 00:11:85:4c:01:01
 60 bytes from 88.123.180.225 (00:11:85:4c:01:01): icmp_seq=0 time=13.367 msec
 60 bytes from 88.123.180.225 (00:11:85:4c:01:01): icmp_seq=1 time=13.929 msec
 60 bytes from 88.123.180.225 (00:11:85:4c:01:01): icmp_seq=2 time=13.929 msec
 
 --- 00:11:85:4c:01:01 statistics ---
 3 packets transmitted, 3 packets received,   0% unanswered
 
 

BUGS

You have to use -B instead of arpinging 255.255.255.255, and -b instead of -S 255.255.255.255. This is libnets fault.

SEE ALSO

ping(8), arp(8), rarp(8)

AUTHOR

Arping was written by Thomas Habets <thomas@habets.pp.se>.

http://www.habets.pp.se/synscan/

git clone http://github.com/ThomasHabets/arping.git