fence_cisco_mds

Langue: en

Autres versions - même langue

Version: 175709 (fedora - 06/07/09)

Section: 8 (Commandes administrateur)

Sommaire

NAME

fence_cisco_mds - I/O Fencing agent for Cisco MDS 9000 series SNMP devices

SYNOPSIS

fence_cisco_mds [OPTION]...

DESCRIPTION

fence_cisco_mds is an I/O Fencing agent which can be used with any Cisco MDS 9000 series with SNMP enabled device. Agent internally uses snmpget, snmpset and snmpwalk command.

fence_cisco_mds accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_cisco_mds can be run by itself with command line options. This is useful for testing.

OPTIONS

-a IPaddress
IP address or hostname of the Cisco device. Can be used any syntax supported by snmpget.
-h
Print out a help message describing available options, then exit.
-c community
The read/write community string to be used in the request.
-n name
Name of port to fence (fc1/1)
-p password
Password for login for SNMP v3 (authentication protocol pass phrase).
-P password
Password for privacy for SNMP v3 (privacy protocol password).
-S script
Script to run to retrieve password for login for SNMP v3 (authentication protocol pass phrase).
-R script
Script to run to retrieve privacy for SNMP v3 (privacy protocol password).
-l login
Login name for SNMP v3 (security name).
-d version
SNMP version (1,2c,3).
-b auth_protocol
SNMP authentication protocol (MD5|SHA).
-E sec_level
SNMP security level (noAuthNoPriv|authNoPriv|authPriv).
-B priv_protocol
SNMP privacy protocol (DES|AES).
-u udp_port
UDP/TCP port to use.
-o action
The action required. off (default), on, status, list or monitor. Deprecated options (enable -> on and disable -> off) can be used too.
-v
Verbose. Record session to stdout, or debug file if specified (see -D).
-D
Specifies file, where will be written debug messages from session.
-V
Print out a version message, then exit.

STDIN PARAMETERS

agent = < param >
This option is used by fence_node(8) and is ignored by fence_cisco_mds.
ipaddr = < param >
IP address or hostname of the Cisco device. Can be used any syntax supported by snmpget.
community = < param >
The read/write community string to be used in the request.
port = < param >
Name of port to fence (fc1/1)
passwd = < param >
Password for login for SNMP v3 (authentication protocol pass phrase).
snmp_priv_passwd
Password for privacy for SNMP v3 (privacy protocol password).
passwd_script = < param >
Script to run to retrieve password for login for SNMP v3 (authentication protocol pass phrase).
snmp_priv_passwd_script = < param>
Password for privacy for SNMP v3 (privacy protocol password).
login = < param >
Login name for SNMP v3 (security name).
snmp_version = < param >
SNMP version (1,2c,3).
snmp_auth_prot = < param >
SNMP authentication protocol (MD5|SHA).
snmp_sec_level = < param >
SNMP security level (noAuthNoPriv|authNoPriv|authPriv).
snmp_priv_prot = < param >
SNMP privacy protocol (DES|AES).
udpport = < param >
UDP/TCP port to use.
action = < param >
The action required. off (default), on, status, list or monitor. Deprecated options (enable -> on and disable -> off) can be used too.
verbose = < param >
Verbose. Record session to stdout, or debug file if specified (see debug).
debug = < param >
Specifies file, where will be written debug messages from session.

SEE ALSO

fence(8), fence_node(8)