Linux Certif

Toute la documentation sur la certification Linux LPI

wirefilter

NAME

wirefilter - Wire packet filter for Virtual Distributed Ethernet

SYNOPSIS

wirefilter

[-l loss] [-d delay] [-D dup] [-b bandwidth] [-s interface_speed] [-c channel_capacity] [-n noise_factor] [-m mtu_size] [-M mgmt socket] [-N]

DESCRIPTION

A wirefilter is able to emulate delays and packet loss on virtual wires. e.g.:

dpipe vde_plug /tmp/s1 = wirefilter -l 10 = vde_plug /tmp/s2

creates a wire between two vde_switches (with sockets /tmp/s1 and /tmp/s2 respectively). This cable looses 10% of the packets in each direction.

OPTIONS

-l loss

percentage of loss as a floating point number. It is possible to specify different loss percentage for the two channels: LR20.5 means 20.5% of packet flowing left to right are lost, RL10 means 10% from right to left.

-d delay

Extra delay (in milliseconds). This delay is added to the real communication delay. Packets are temporarily stored and resent after the delay. It is possible to specify different values for LR and RL like in the previous option. When the delay is specified as two numbers with a + in between, the first is the standard delay and the second is a random variation. 1000+500 means that the delay can be randomly chosen between half second and 1.5 seconds.

-D dup

percentage of dup packet. It has the same syntax of -l. Do not use dup factor 100% because it means that each packet is sent infinite times.

-b bandwidth

Channel bandwidth in Bytes/sec. It has the same syntax of -d. It is also possible to use suffixes K,M,G to abbreviate 2^10, 2^20, 2^30. 128K means 128KBytes/sec. 128+64K means 64i to 196KBytes/sec. Sender is not prevented from sending packets, delivery is delayed to limit the bandwidth to the desired value. (Like a bottleneck along the path)

-s speed

Interface speed in Bytes/sec. It has the same syntax of -b. Input is blocked for the tramission time of the packet, thus the sender is prevented from sending too fast.

-c capacity

Channel capacity (in Bytes): maximum size of the packet queue. Exceeding packets are discarded.

-n noise factor

Number of bits damaged/one megabyte.

-m mtu size

Packets longer than mtu_size are discarded.

-N

nofifo. with -N packets can be reordered.

-M mgmt socket

the unix socket where the parameters (loss percentage, delay etc) can be checked and changed runtime. unixterm(1) can be used as a remote terminal for wirefilter.

NOTICE

Virtual Distributed Ethernet is not related in any way with www.vde.com ("Verband der Elektrotechnik, Elektronik und Informationstechnik" i.e. the German "Association for Electrical, Electronic & Information Technologies").

SEE ALSO

vde_switch(1), vdeq(1). dpipe(1). unixterm(1).

AUTHOR

VDE is a project by Renzo Davoli <renzo@cs.unibo.it>