Rechercher une page de manuel
fence_ibmblade
Langue: en
Version: 175139 (fedora - 06/07/09)
Section: 8 (Commandes administrateur)
NAME
fence_ibmblade - I/O Fencing agent for IBM BladeCenterSYNOPSIS
fence_ibmblade [OPTION]...DESCRIPTION
fence_ibmblade is an I/O Fencing agent which can be used with IBM BladeCenter chassis. It issues SNMP Set request to BladeCenter chassis, rebooting, powering up or down the specified Blade Server.fence_ibmblade accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ibmblade can be run by itself with command line options. This is useful for testing.
OPTIONS
- -a IPaddress
- IP address or hostname of the SNMP device. Can be used any syntax supported by snmpget.
- -h
- Print out a help message describing available options, then exit.
- -c community
- The read/write community string to be used in the request.
- -n name
- Name of port to fence or ifIndex.
- -p password
- Password for login for SNMP v3 (authentication protocol pass phrase).
- -P password
- Password for privacy for SNMP v3 (privacy protocol password).
- -S script
- Script to run to retrieve password for login for SNMP v3 (authentication protocol pass phrase).
- -R script
- Script to run to retrieve privacy for SNMP v3 (privacy protocol password).
- -l login
- Login name for SNMP v3 (security name).
- -d version
- SNMP version (1,2c,3). Default is 1.
- -b auth_protocol
- SNMP authentication protocol (MD5|SHA).
- -E sec_level
- SNMP security level (noAuthNoPriv|authNoPriv|authPriv).
- -B priv_protocol
- SNMP privacy protocol (DES|AES).
- -u udp_port
- UDP/TCP port to use.
- -o action
- The action required. off (default), on, status, list or monitor. Deprecated options (enable -> on and disable -> off) can be used too.
- -v
- Verbose. Record session to stdout, or debug file if specified (see -D).
- -D
- Specifies file, where will be written debug messages from session.
- -V
- Print out a version message, then exit.
STDIN PARAMETERS
- agent = < param >
- This option is used by fence_node(8) and is ignored by fence_ibmblade.
- ipaddr = < param >
- IP address or hostname of the SNMP device. Can be used any syntax supported by snmpget.
- community = < param >
- The read/write community string to be used in the request.
- port = < param >
- Name of port to fence or ifIndex.
- passwd = < param >
- Password for login for SNMP v3 (authentication protocol pass phrase).
- snmp_priv_passwd
- Password for privacy for SNMP v3 (privacy protocol password).
- passwd_script = < param >
- Script to run to retrieve password for login for SNMP v3 (authentication protocol pass phrase).
- snmp_priv_passwd_script = < param>
- Password for privacy for SNMP v3 (privacy protocol password).
- login = < param >
- Login name for SNMP v3 (security name).
- snmp_version = < param >
- SNMP version (1,2c,3). Default is 1.
- snmp_auth_prot = < param >
- SNMP authentication protocol (MD5|SHA).
- snmp_sec_level = < param >
- SNMP security level (noAuthNoPriv|authNoPriv|authPriv).
- snmp_priv_prot = < param >
- SNMP privacy protocol (DES|AES).
- udpport = < param >
- UDP/TCP port to use.
- action = < param >
- The action required. off (default), on, status, list or monitor. Deprecated options (enable -> on and disable -> off) can be used too.
- verbose = < param >
- Verbose. Record session to stdout, or debug file if specified (see debug).
- debug = < param >
- Specifies file, where will be written debug messages from session.
SEE ALSO
fence(8), fence_node(8)Contenus ©2006-2024 Benjamin Poulain
Design ©2006-2024 Maxime Vantorre